Abstract:LaCoO3 thin films with perovskite structure were prepared on Si(lll) substrate successfully by using an amorphous heteronuclear complex, LaCo(DTPA). 6H(2)O (DTPA, diethylenetriaminepentaacetic acid), as a precursor. X-Ray diffraction (XRD) results indicated that the crystalline sizes of LaCoO3 films grew from 17.8 to 34.3 nm with the calcination temperature increasing from 550 to 800 degreesC for 1 h and the crystalline sizes of LaCoO3 films grew from 22.3 to 25.3 nm with the calcination time increasing from 1 to 6 h at 650 degreesC. Auger electron spectroscopy (AES) depth profile analysis indicated that the composition of the thin film was homogenous with depth the interface diffusion took place between LaCoO3 layer and Si substrate. The thickness of LaCoO3 thin film depended on the concentration of the precursor solution and could be described approximately by the following equation: d = 0.580c + 0.285c(2). Scanning electron microscopy (SEM) indicated that the texture of the film was governed by the concentration of precursor solution When the concentration of precursor solution was lower than 15%, a smooth film without microcrack was obtained. The texture of the film could be modified significantly by adding polyethylene glycol (PEG). But the thickness of the film was hardly influenced by the addition of PEG. (C) 2001 Elsevier Science B.V. All rights reserved.

Preparation And Properties Of Ultra Fine Lamno3 And Lacoo3 Perovskite Compounds

Synthesis Of Nanostructure Lamno3 And Lacoo3 Catalysts And Their Catalytic Activity In Oxidation Reaction

Structural Characterization and Co Oxidation Activity of Nanostructured Lamno3 Catalysts

Preparation of nanosized LaCoxMn1−xO3 perovskite oxide using amorphous heteronuclear complex as a precursor

Microstructure and Electrochemical Characterization of Spherical-Like Orthorhombic LiMnO2 Via Co-Precipitation

Synthesis of nanosized perovskite powder using amorphous complex method and their CO catalytic oxidation performance

Study of Preparation of Cobalt Aluminate by Sol-Gel Process and Electroless Plating

Preparation and Properties of Perovskite La1-xSrxCoO3-delta Powders and Ag-LSCO Electrical Contact Composite Materials

Influence Of Peg Additive And Precursor Concentration On The Preparation Of Lacoo3 Film With Perovskite Structure

Preparation and characterization of the non-stoichiometric La–Mn perovskites

Preparation of Three-Dimensionally Ordered Macroporous Perovskite Materials

PREPARATION AND ELECTROCHEMICAL PROPERTIES OF NANOSTRUCTURED Li0.8CoO2

Study of the Preparation Process of Perovskite Oxides SmMnO3 by XRD and TPR Technique

Preparation, magnetic properties and magnetoresistance of the layered perovskite La2 KMn2 O7 and La3 KMn3O10

Preparation and Characterization of Peroxycarbonate Gadolinium

Preparation and characterization of La0.5Sr0.5 CoO3 by chemical solution deposition method and its application

Electrospinning-based preparation of LaMO3(M=Co Fe Mn) nanofibers and its characterization

Third order nonlinear optical properties and electrochemical performance of La2CoMnO6 double perovskite

Preparation of nanosized LaCoO3 perovskite oxide using amorphous heteronuclear complex as a precursor at low temperature

Preparation, structure and electrical properties of L7i0.67Sr0.33MnO3(Ln=La, Pr, Nd, Sm)

Preparation of nano-sized lanthanum oxide by ultrasonic-homogeneous precipitation method