Abstract:The content control of the impurities in refined TiCl₄ becomes the key part for the quality control of titanium material. Refined TiCl₄ is the key procedure in producing titanium sponge. Besides, the content of the impurities in titanium sponge and that of the impurities in refined TiCl₄ presents the 4-times enrichment relationship. Therefore, control the content of the oxygen, there is the need to analyze the source of oxygen impurities so that strict control can be conducted over the impurities of refined TiCl₄. Determination of TiOCl₂ in refined TiCl₄ was significant for analysis of its impurities. TiOCl₂ could be determined by infrared spectroscopy due to its infrared characteristic spectrum line. However, normal infrared absorption cell was not fit for the sample analysis, because TiCl₄ easily reacted with moisture in the air and immediately was hydrolyzed to form highly corrosive hydrochloric acid smoke. According to Lambert-Beer Law, which means the concentration (c(x)) and absorbance (A)-length (L) curve's slope have direct ratio. The infrared absorption cell with the window film of ZnSe (Φ10 x 1 mm, wavenumers: 7800-440 cm⁻¹) and the glass cell (optical path: 22, 12, 7 and 4 mm) was assembled and utilized in determination of the TiOCl₂ in refined TiCl₄ by standard addition method. The detection limit of TiOCl₂ was 17.8 mg · kg⁻¹, the regression equation was Y = 1.011 8X, R = 0.9963; With standard addition method, the regression equation of TiOCl₂ was Y = 1.940 0X, R = 0.997 0, it' s good in linearity relation, the TiOCl₂ content in refined TiCl₄ is determined to be 833.8 mg · kg⁻¹ and SD up to 40.0 mg · kg⁻¹. RSD of the method precision is between 0.95%-1.94%, while recovery rate is between 88.5%-93.1%. This infrared absorption device was safe, simple and convenient, easily removable and washable, and re-useable. The method could conduct the quantitative analysis over the TiOCl₂ content in refined TiCl₄ through adding standard sample for one time, it could meet the requirement of determination of TiOCl₂ in refined TiCl₄.

Study on the Method for the Determination of Impurities in Titanium Dioxide by ICP-MS

Determination of Trace Impurities in High Purity Titanium Dioxide by High Resolution Inductively Coupled Plasma Mass Spectrometry

Study on determination of impurities in tungsten concentrates with ICP-MS

A Comparison of Slurry Sampling Electrothermal Vaporization and Slurry Nebulization Inductively Coupled Plasma Mass Spectrometry for the Direct Determination of Trace Impurities in Titanium Dioxide Powder.

In-situ Separation of the Matrix for the Direct Determination of Traces of Chromium, Cobalt, and Nickel in Titanium Dioxide Powder by Electrothermal Atomic-Absorption Spectrometry with Slurry Sampling

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry

Effect of different digesting methods on the detection of titanium dioxide nanoparticles concentration

Determination of metal impurities in titanium dioxide using slurry sample introduction by axial viewing inductively coupled plasma optical emission spectrometry

Determination of impurity elements in tungsten concentrates by ICP-MS

Study of the Adsorption Behavior of Heavy Metal Ions on Nanometer-Size Titanium Dioxide with ICP-AES.

Determination of TiO_2 in flour by ICP-AES

Determination of Trace Metal Impurities in High Pure Tin Oxide Electrode Material by Inductively Coupled Plasma Mass Spectrometry

Nanometer-size Titanium Dioxide Microcolumn On-Line Preconcentration of Trace Metals and Their Determination by Inductively Coupled Plasma Atomic Emission Spectrometry in Water

Ion Chromatography for the Determination of Sulfate in Nano-Titanium Dioxide

A novel approach for determining total titanium from titanium dioxide nanoparticles suspended in water and biosolids by digestion with ammonium persulfate

Direct ICP-AES Determination of Trace Impurities in Silicon Dioxide Using Fluorinating Electrothermal Vaporization with Slurry Sampling

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

Determination of Traces of Lead in Titanium Dioxide Powder by Microscale Anodic Stripping Voltammetry

Accurate Determination of Non-Metallic Impurities in High Purity Tetramethylammonium Hydroxide Using Inductively Coupled Plasma Tandem Mass Spectrometry

[A Set of Infrared Cells for the Determination of Titanium Oxychloride in Refined Titanium Tetrachloride].

Analysis of Impurity Elements in High Purity Cobalt Powder by Inductively Coupled Plasma Tandem Mass Spectrometry