Abstract:Titanium dioxide (i.e. TiO(2)) in nano-form is a constituent of many nanomaterials that are used in sunscreens, cosmetics, industrial products and in biomedical applications. Quantification of TiO(2) nanoparticles in various matrixes is a topic of great interest for researchers studying the potential health and environmental impacts of nanoparticles. However, analysis of TiO(2) as Ti(4+) is difficult because current digestion techniques require use of strong acids that may be a health and safety risk in the laboratory. To overcome this problem, we developed a new method to digest TiO(2) nanoparticles using ammonium persulfate as a fusing reagent. The digestion technique requires short times to completion and optimally requires only 1 g of fusing reagent. The fusion method showed >95% recovery of Ti(4+) from 6 μg mL(-1) aqueous suspensions prepared from 10 μg mL(-1) suspension of different forms of TiO(2,) including anatase, rutile and mixed nanosized crystals, and amorphous particles. These recoveries were greater than open hot-plate digestion with a tri-acid solution and comparable to microwave digestion with a tri-acid solution. Cations and anions commonly found in natural waters showed no significant interferences when added to samples in amounts of 10 ng to 110 mg, which is a much broader range of these ions than expected in environmental samples. Using ICP-MS for analysis, the method detection limit (MDL) was determined to be 0.06 ng mL(-1), and the limit of quantification (LOQ) was 0.20 ng mL(-1). Analysis of samples of untreated and treated wastewater and biosolids collected from wastewater treatment plants yielded concentrations of TiO(2) of 1.8 and 1.6 ng mL(-1) for the wastewater samples, respectively, and 317.4 ng mg(-1) dry weights for the biosolids. The reactions between persulfate ions and TiO(2) were evaluated using stoichiometric methods and FTIR and XRD analysis. A formula for the fusing reaction is proposed that involves the formation of sulfate radicals.

Ion Chromatography for the Determination of Sulfate in Nano-Titanium Dioxide

In-situ Separation of the Matrix for the Direct Determination of Traces of Chromium, Cobalt, and Nickel in Titanium Dioxide Powder by Electrothermal Atomic-Absorption Spectrometry with Slurry Sampling

Determination of Trace Impurities in High Purity Titanium Dioxide by High Resolution Inductively Coupled Plasma Mass Spectrometry

pH control on preparation of nano-TiO_2 by gel-sol process

Study of the Adsorption Behavior of Heavy Metal Ions on Nanometer-Size Titanium Dioxide with ICP-AES.

Study on the Method for the Determination of Impurities in Titanium Dioxide by ICP-MS

Ion Chromatographic Determination of Sulfate Ion in Carbonates and Chlorides of Rare Earth Elements after Separation by Cation Exchange Resin

Spectrophotometric determination of total precipitated quantities of titanium dioxide in Ni-based nano-composite coatings

Technical And Structure Study Of Coprecipitation Method For Nano-Titanium Dioxide

Nanometer-size Titanium Dioxide Microcolumn On-Line Preconcentration of Trace Metals and Their Determination by Inductively Coupled Plasma Atomic Emission Spectrometry in Water

Determination of Sulfate Ion of Calcium Sulphate by Ion Chromatography

A novel approach for determining total titanium from titanium dioxide nanoparticles suspended in water and biosolids by digestion with ammonium persulfate

Preparation of Nanometer Titanium Dioxide by Industrial Titaniferous Solution

Rapid Determination of Titanium in Titanates

Exploring Surface Chemistry of Nano-Tio2 for Automated Speciation Analysis of Cr(iii) and Cr(vi) in Drinking Water Using Flow Injection and ET-AAS Detection

Determination Of Standard Value Of Sulfate Standard Solution By Ion Chromatography

Determination of Trace Titanium in Composite Coatings by Spectrophotometry with Sensitizing Surfactant

Preconcentration and Separation of Trace Amounts of Oxalate with Chitosan and Determination by Ion Chromatography

Effect of different digesting methods on the detection of titanium dioxide nanoparticles concentration

Determination of metal impurities in titanium dioxide using slurry sample introduction by axial viewing inductively coupled plasma optical emission spectrometry

Preparation of nano-TiO2 using metatitanic acid as raw materials