Abstract:Abstract Styrene-butadiene-styrene (SBS) rubbers stand as one of the most frequently employed thermoplastic elastomers globally. The upper operating temperature of SBS is limited by the glass transition temperature (Tg) of polystyrene, circa 100 °C. This study demonstrates a noteworthy enhancement in the properties of SBSs by introducing a diblock copolymer consisting of styrene and α-methylene-γ- butyrolactone (α-MBL). Polymers derived from α-MBL exhibit exceptional thermal stability, attributable to a glass transition temperature of 195 °C. Notably, α-MBL, also recognized as Tulipalin A, is a bio-renewable compound naturally found in tulips. This investigation encompasses both crosslinked and non-crosslinked blends of poly(styrene)-b-poly(α- methylene-γ-butyrolactone) diblock copolymer (PS-PMBL) and poly(styrene)-b-poly(butadiene)-b- poly(styrene) triblock copolymer, within the 0-20 wt.% PS-PMBL range. Thorough examination employing thermal analysis and linear shear rheology reveals that all blends surpass the properties of their pure SBS counterparts. Specifically, blending at 200 °C induces crosslinking between the polymers, yielding heightened Young’s modulus and complex viscosity, thereby resulting in a robust and rigid material compared to non-crosslinked blends. For non-crosslinked blends, an increase in strength is observed while maintaining commendable rubbery properties. Notably, the non-crosslinked blends permit the recycling of components (SBS and PS- PMBL) through the re-dissolving of rubber in tetrahydrofuran (THF). These findings present a promising avenue for the enhancement of rubbers through the incorporation of bio-renewable compounds.

MODIFICATION OF PVC/PS BLEND WITH SOME DIFFERENT ELASTOMERS

Properties of Polar SBS/PS Thermoplastic Elastomer Prepared by Blending Modification

Studies on Mechanical and Rheological Properties of Poly(Vinyl Chloride) Modified with Elastomers and Rigid Organic Particles

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Rheological behavior and morphology of blends of copolymers of ?-methylstyrene-co-acrylate with PVC

Modification of ABS/PVC Blend

Phase Separation of Impact‐modified PVC/PMMA Blends under Melt‐blending Conditions

Miscibility, Phase Behavior, and Mechanical Properties of Ternary Blends of Poly(vinyl Chloride)/polystyrene/chlorinated Polyethylene-Graft-polystyrene

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends

Study on physical and mechanical properties of PP/Syndiotactic 1, 2- polybutadiene blends

Miscibility, Thermal Stability, Rheological and Mechanical Properties of Blends Derived from Polysulfone Oligomer and Poly (phthalazinone Ether Sulfone Ketone)

Mechanical And Tribological Properties Of Paws Blends

Mechanical and Tribological Properties of PA/PPS Blends

A novel SBS compound via blending with PS-b-PMBL diblock copolymer for enhanced mechanical properties

Study on Impact Property and Weather Resistance of EPDM-g-MS/PS by Suspension Copolymerization

Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer(EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer(SBS)

Mechanical properties and morphological structures relationship of blends based on sulfated EPDM ionomer and polypropylene

Influence of polyphenylene sulfide on plasticization and toughening of polyarylene ether nitrile/polyphenylene sulfide blends

Research on Poly(lactic acid)/Poly(butylenes succinate) Blends