Abstract:Schematic representnation of using FTIR as a simple and direct tool for identifying transesterification in PBT/PC immescible blends. This study focuses on the experimental investigation of the mechanical properties of PBT/PC blends with varying compositions. The studied mechanical properties include tensile strength, elongation, tensile modulus, impact strength, and Shore hardness of PBT/PC blends with different PC contents. PBT, characterized by its semi‐crystalline and tough nature, contrasts with PC, known for its impact resistance and hardness. Achieving an optimal blend composition proves to be crucial for attaining the best combination of these properties. The tensile strength of the PBT/PC 30/70 blend increased by approximately 24%, with Shore hardness also experienced a 12% enhancement compared to pure PBT. This improvement is attributed to the presence of PC segments in the blend structure. Conversely, an increase in PC content led to the elongation and impact strength of the blends peaking in the PBT/PC 70/30 blend. Notably, the impact strength of the PBT/PC blend with 30% PC increased by about three times compared to PBT and 18% more than pure PC. Scanning Electron Microscopy (SEM) analysis revealed that PBT and PC segments disperse at lower PC content, while at higher content, phase separation becomes prominent. Fourier Transform Infrared Spectroscopy (FTIR) analysis indicates direct transesterification between PBT and PC, resulting in the formation of a long‐chain blend structure with random copolymer blocks. The transesterification mechanism is also supported by Differential Scanning Calorimetry (DSC) results, wherein a reduction in the crystallization temperature (Tc) and an increase in the glass transition temperature (Tg) is observed. The study concludes that the volume of these segments and their bonding play a decisive role in determining the mechanical properties. The bonding mechanism elucidated through FTIR and SEM provides valuable insights into the fabrication and property engineering of PBT/PC blends.

Tensile and Transformational Behavior of Poly(Ether Sulfone) Polycarbonate Blends

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Visualization of Poly(ether Imide) and Polycarbonate Blending in an Internal Mixer

Note: Interfacial layer and phase inversion behavior in the blend of polyethersulfone and polycarbonate

Compatibilizing modification of polyethersulfone/polycarbonate blend

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Thermal and Mechanical Properties of Poly(butylene Terephthalate)/epoxy Blends

Study on PPESK-PPS blends

Effect of polycarbonate (PC) content on the mechanical properties, morphology and transesterification mechanism of PBT/PC immiscible blends

Morphology and Deformation Mechanisms of Polystyrene Low-Density Polyethylene Blends Studied by Tem

The influence of phase morphology of polycarbonate/polyethersulfone blends on the failure behavior between the blends and polyurethane in the peel test

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Fully biodegradable poly(3-hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene succinate) blends: Phase behavior, crystallization and mechanical properties