Abstract:In 2000, Tarascon et al. revealed the reversible conversion reaction based on the size effect of nanoparticles in metal oxide system, whose theoretical capacity is up to 1000mAh·g-1[1]. However, except large capacity, metal oxide as anode material has its own drawbacks. For example, the electronic conductivity of metal oxides is usually poor, and some of them will form alloy with lithium during the reaction process which cause huge volume change. In order to overcome these obstacles, lots of methods have been presented. Mainly includes the following ways: 1) Fabricating thin film materials, 2) Synthesizing nanostructured materials, 3) Doping or preparing composite materials. Further works showed the doping is effective and convenient in thin film fabrication, and the composite thin films usually obtained better performance than the single system. NiO-NiSe nanocomposite films were fabricated by plused laser deposition. Charge/discharge measurements, cyclic voltammograms and AC impedance tests were used to investigate cyclic performance and electrochemical properties of the materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) were employed to detect the structure, morphology and composition of these nanocomposite films in certain electrochemical states. In addition, the electrochemical reaction mechanism of the films versus Li were discussed. The results indicated that: Compared with the single system NiO or NiSe, the transfer resistance of lithium ion in NiO-NiSe nanocomposite thin film is smaller. NiO-NiSe electrode also exhibited a little higher discharge-charge capacity and better cycle performance. After 50 cycles, a reversible capacity of 495mAh.g-1 can still be obtained. NiO-NiSe nanocomposite film also has good rate capability and is more suitable for lithium-ion battery anode material. The electrochemical reaction mechanism investigation showed that NiO and NiSe in the electrode reacted with lithium separately and could be reversibly reproduced.

A Study Of Pulsed Laser Deposited Amorphous Nickel-V2o5 Composite Film And Its Electrochemical Properties

Characterization and preparation of NiO-V2O5 composite film cathodes

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

A Nanocrystalline Nio Thin-Film Electrode Prepared by Pulsed Laser Ablation for Li-Ion Batteries

Electrochemical Performances of Nanostructured Ni3P–Ni Films Electrodeposited on Nickel Foam Substrate

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Excellent electrochemical performance and thermal stability of LiNi0.5Mn1.5O4 thin-film cathode prepared by pulsed laser deposition

High Power and Capacity of Lini0.5mn1.5o4 Thin Films Cathodes Prepared by Pulsed Laser Deposition

Composite NiO-NiSe Thin Film Fabricated by Pulse Laser Deposition As a New Anode of Lithium Ion Batteries

High-capacity LiV3O8 Thin-Film Cathode with a Mixed Amorphous–nanocrystalline Microstructure Prepared by RF Magnetron Sputtering

Pulsed Laser Deposited NiO–NiSe Nanocomposite As a New Anode Material for Lithium Storage

Enhanced electrochemical properties of NiO–NiS nanocomposite thin film

Excellent Electrochemical Performance and Thermal Stability of LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> Thin-Film Cathode Prepared by Pulsed Laser Deposition

Fabrication and Characterization of Silver−V2O5 Composite Thin Films As Lithium-Ion Insertion Materials

Unlocking the Electrochemistry Abilities of Nanoscaled Na2/3ni1/4mn3/4o2 Thin Films

Three-Dimensional Porous Nano-Ni/Fe3o4 Composite Film: Enhanced Electrochemical Performance For Lithium-Ion Batteries

Electrochemical Investigation on Nanoflower-Like CuO/Ni Composite Film As Anode for Lithium Ion Batteries

A study on the formation conditions of amorphous nickel-phosphorus (Ni-P) alloy by laser-assisted electrodeposition

The Fabrication of Li3vo4/Ni Composite Material and Its Electrochemical Performance As Anode for Li-Ion Battery

The Electrochemical Properties of LiF-Ni Nanocomposite Thin Film

Superior long-term cyclability of a nanocrystalline NiO anode enabled by a mechanochemical reaction-induced amorphous protective layer for Li-ion batteries