Abstract:In 2000, Tarascon et al. revealed the reversible conversion reaction based on the size effect of nanoparticles in metal oxide system, whose theoretical capacity is up to 1000mAh·g-1[1]. However, except large capacity, metal oxide as anode material has its own drawbacks. For example, the electronic conductivity of metal oxides is usually poor, and some of them will form alloy with lithium during the reaction process which cause huge volume change. In order to overcome these obstacles, lots of methods have been presented. Mainly includes the following ways: 1) Fabricating thin film materials, 2) Synthesizing nanostructured materials, 3) Doping or preparing composite materials. Further works showed the doping is effective and convenient in thin film fabrication, and the composite thin films usually obtained better performance than the single system. NiO-NiSe nanocomposite films were fabricated by plused laser deposition. Charge/discharge measurements, cyclic voltammograms and AC impedance tests were used to investigate cyclic performance and electrochemical properties of the materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) were employed to detect the structure, morphology and composition of these nanocomposite films in certain electrochemical states. In addition, the electrochemical reaction mechanism of the films versus Li were discussed. The results indicated that: Compared with the single system NiO or NiSe, the transfer resistance of lithium ion in NiO-NiSe nanocomposite thin film is smaller. NiO-NiSe electrode also exhibited a little higher discharge-charge capacity and better cycle performance. After 50 cycles, a reversible capacity of 495mAh.g-1 can still be obtained. NiO-NiSe nanocomposite film also has good rate capability and is more suitable for lithium-ion battery anode material. The electrochemical reaction mechanism investigation showed that NiO and NiSe in the electrode reacted with lithium separately and could be reversibly reproduced.

AlN-Fe Nanocomposite Thin Film: A New Anode Material for Lithium-lon Batteries

AlN-Fe Nanocomposite Thin Film:A New Anode Material for Lithium-Ion Batteries

Activating AlN Thin Film by Introducing Co Nanoparticles As a New Anode Material for Thin-Film Lithium Batteries

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Α-Fe2o3 Nanoparticle-Loaded Carbon Nanofibers As Stable and High-Capacity Anodes for Rechargeable Lithium-Ion Batteries.

Pulsed Laser Deposited NiO–NiSe Nanocomposite As a New Anode Material for Lithium Storage

Nanocomposites As Anode for Lithium-Ion Battery

Li3n-Co Nanocomposite: A New Promising Lithium-Ion Storage Material

Composite NiO-NiSe Thin Film Fabricated by Pulse Laser Deposition As a New Anode of Lithium Ion Batteries

The Electrochemical Properties of LiF-Ni Nanocomposite Thin Film

Nanocrystalline ZnFe[sub 2]O[sub 4] and Ag-Doped ZnFe[sub 2]O[sub 4] Films Used as New Anode Materials for Li-Ion Batteries

Combinatorial Investigations of Co-LiF and Co-Li3N Nanocomposite As New Lithium Storage Material

Three-Dimensional Porous Nano-Ni/Fe3o4 Composite Film: Enhanced Electrochemical Performance For Lithium-Ion Batteries

Nanostructured Zn-based Composite Anodes for Rechargeable Li-ion Batteries

A Lithiophilic AlN-modified Copper Layer for High-Performance Lithium Metal Anodes

Core-Shell Structured Fe3o4@Nis Nanocomposite As High-Performance Anode Material for Alkaline Nickel-Iron Rechargeable Batteries

MnFe2O4-graphene nanocomposites with enhanced performances as anode materials for Li-ion batteries.

Nanostructured ZnFe2O4 as Anode Material for Lithium-Ion Batteries: Ionic Liquid-Assisted Synthesis and Performance Evaluation with Special Emphasis on Comparative Metal Dissolution.

Nanostructured NiSi thin films as a new anode material for lithium ion batteries

A Novel Material Li2NiFe2O4: Preparation and Performance As Anode of Lithium Ion Battery

Fe3O4 Nanoparticle-Decorated Bimodal Porous Carbon Nanocomposite Anode for High-Performance Lithium-Ion Batteries