Abstract:Solid-state batteries combined with high-voltage layered cathode and lithium metal anode display good safety and high energy density, showing great potential as next-generation energy storage devices. However, the low ionic conductivity and poor stability with lithium metal of most solid electrolytes inhibit the development of solid-state lithium metal batteries. Herein, Ag+ is successfully integrated into Li5.5PS4.5Cl1.5 structure with improved ionic conductivity and better lithium metal stability for the yielded Li5.5-xAgxPS4.5Cl1.5 (x = 0, 0.02, 0.05, 0.10) electrolytes. Ag+ dopant is carefully tailored to achieve the optimal Li5.45Ag0.05PS4.5Cl1.5 electrolyte with a high Li-ion conductivity of up to 9.1 mS cm−1 and a large CCD value of 1.8 mA cm−2. The corresponding battery with LiNi0.6Mn0.2Co0.2O2 cathode and Li-In anode delivers a high initial discharge capacity of 154.9 mAh g−1 at 1.0C and maintains 94.5% of this value after 100 cycles. However, the same cathode shows low discharge capacities and fast degradation of capacities with bare lithium metal anode in solid-state batteries. A facial 3D host lithium metal with Ag and LiNO3 particles on the surface is designed as the anode for this battery, showing much higher capacities and superior cyclability at different C-rates. The corresponding battery delivers discharge capacities of 140.6 mAh g−1 and 105.4 mAh g−1 when cycled at 0.1C and 0.5C. These superior electrochemical performances are attributed to the dual modification of Ag+ both in solid electrolytes and lithium metal anodes.

A Novel Li2Ag0.5V2O5 Composite Film Cathode for All-Solid-state Lithium Batteries

Fe2O3–Ag Porous Film Anodes for Ultrahigh‐Rate Lithium‐Ion Batteries

Synthesis and the Improved High-Rate Performance of Limn2o4/Ag Composite Cathode for Lithium-Ion Batteries

Fabrication and Electrochemical Properties of All Solid State 0.3Ag-V2o5│lipon│li Thin Film Battery

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Synthesis and electrochemical performances of Li3V2(PO4)3/(Ag + C) composite cathode

Fabrication and Characterization of Silver−V2O5 Composite Thin Films As Lithium-Ion Insertion Materials

High Capacity and Rate Performance of LiNi0.5Co0.2Mn0.3O2composite Cathode for Bulk-Type All-Solid-state Lithium Battery

Ag Embedded Li3VO4 As Superior Anode for Li-Ion Batteries

A Li3V2(PO4)3/C Thin Film with High Rate Capability As a Cathode Material for Lithium-Ion Batteries

Synthesis and electrochemical performance of lithium vanadium phosphate and lithium vanadium oxide composite cathode material for lithium ion batteries

Studies on lithium phosphorous oxynitride electrolyte thin films and a new all-solid-state thin film lithium battery

Self-Assembled Synthesis of Hierarchical Waferlike Porous Li–V–O Composites As Cathode Materials for Lithium Ion Batteries

Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries

Li3v2(Po4)(3)/C Composite As an Intercalation-Type Anode Material for Lithium-Ion Batteries

Characterization of Composite 0.5ag:V[sub 2]o[sub 5] Thin-Film Electrodes for Lithium-Ion Rocking Chair and All-Solid-State Batteries

Superlithiophilic Ag Particles Embedded in Flexible Polymer Solid Electrolyte Interface Films for Dendrite-Free Lithium Metal Anodes

Ag/microcrystalline-Cu2O composite film as an interfacial regulator for highly reversible lithium metal anode

Ag-modification argyrodite electrolytes enable high-performance for all-solid-state lithium metal batteries

Three-Dimensional Porous Fe0.1v2o5.15 Thin Film As A Cathode Material for Lithium Ion Batteries

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance