Abstract:Rechargeable lithium-ion batteries with high energy density that can be safely charged and discharged at high rates are desirable for electrified transportation and other applications. However, the sub-optimal intercalation potentials of current anodes result in a trade-off between energy density, power and safety. Here we report that disordered rock salt Li3+x V2O5 can be used as a fast-charging anode that can reversibly cycle two lithium ions at an average voltage of about 0.6 volts versus a Li/Li+ reference electrode. The increased potential compared to graphite reduces the likelihood of lithium metal plating if proper charging controls are used, alleviating a major safety concern (short-circuiting related to Li dendrite growth). In addition, a lithium-ion battery with a disordered rock salt Li3V2O5 anode yields a cell voltage much higher than does a battery using a commercial fast-charging lithium titanate anode or other intercalation anode candidates (Li3VO4 and LiV0.5Ti0.5S2). DFT calculations reveal that lithium is displaced from stable octahedral sites to less stable tetrahedral sites, resulting in a suppression of the voltage. The crystal structure is well maintained throughout the process with a maximum volume change of 5.9%. This gives rise to exceptional cycling stability, with negligible capacity decay after 6000 cycles. Further, the material is shown to have exceptional rate capabilities, delivering over 40 per cent of its capacity in 20 seconds. Theoretical calculations unveil unique lithium redistribution mechanisms that are responsible for the high rate capability. At the beginning of Li insertion into Li3V2O5, diffusion of Li takes place by a concerted t-o-t mechanism where tetrahedral Li pushes its neighboring octahedral Li to another tetrahedral sites. At the end of the insertion process, direct tetrahedron to tetrahedron (t-t) diffusion is preferred. Both of these mechanism feature low activation energy values which result in rapid lithium diffusion and exceptional rate capabilities. This low-potential, high-rate intercalation reaction can be used to identify other metal oxide anodes for fast-charging, long-life lithium-ion batteries.

Characterization of Composite 0.5ag:V[sub 2]o[sub 5] Thin-Film Electrodes for Lithium-Ion Rocking Chair and All-Solid-State Batteries

Synthesis and the Improved High-Rate Performance of Limn2o4/Ag Composite Cathode for Lithium-Ion Batteries

A Novel Li2Ag0.5V2O5 Composite Film Cathode for All-Solid-state Lithium Batteries

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Tin Oxide and Carbon Composite (sn6o4(oh)4/ag) As the Anode in a Lithium Ion Battery

High Capacity and Rate Performance of LiNi0.5Co0.2Mn0.3O2composite Cathode for Bulk-Type All-Solid-state Lithium Battery

Self-Assembled Synthesis of Hierarchical Waferlike Porous Li–V–O Composites As Cathode Materials for Lithium Ion Batteries

Fabrication and Characterization of Silver−V2O5 Composite Thin Films As Lithium-Ion Insertion Materials

Fabrication and Electrochemical Properties of All Solid State 0.3Ag-V2o5│lipon│li Thin Film Battery

Highly Stable LiI/Active Graphene Composite Cathodes for Efficient Lithium-Iodine Batteries

Ag Embedded Li3VO4 As Superior Anode for Li-Ion Batteries

Improvement of lithium battery performance through composite electrode microstructure optimization

Interconnected Ultrasmall V2O3 and Li4Ti5O12 Particles Construct Robust Interfaces for Long-Cycling Anodes of Lithium-Ion Batteries

Improved Cyclability of Lithium-Ion Battery Anode Using Encapsulated V2o3 Nanostructures in Well-Graphitized Carbon Fiber

Modification of LiMn 2 O 4 Cathodes to Boost Kinetics Match via rGO for High-Performance Rocking-Chair Lithium-Ion Capacitors

Structural Changes in the Silver-Carbon Composite Anode Interlayer of Solid-State Batteries

(Invited) Disordered Rock-Salt Li<sub>3+X</sub>V<sub>2</sub>O<sub>5</sub>: A High-Rate Anode for Lithium-Ion Batteries

Regulating and Understanding the Compatibility of Sulfide Composite Solid-State Electrolyte in Nickel-Rich Lithium Metal Batteries

An Ultrastable Presodiated Titanium Disulfide Anode for Aqueous “Rocking‐Chair” Zinc Ion Battery

SnSb–ZnO composite materials as high performance anodes for lithium-ion batteries

In Situ Carbon Insertion in Laminated Molybdenum Dioxide by Interlayer Engineering Toward Ultrastable “Rocking‐Chair” Zinc‐Ion Batteries