Abstract:Frontier research in neuroscience places a high demand for high-density, implantable, wireless Brain-Machine Interfaces (BMIs) consisting of more than 1,000 recording channels with a sampling rate up to 20 to 30kS/s per channel to acquire the precise activity of a single neuron. A wireless data link with Gb/s throughput is strongly required. In addition to the data-rate, the wireless telemetry module faces a strictly limited power budget of only a few milliwatts, to avoid tissue heating. Thirdly, a compact implant design with as few as possible off-chip components is expected to minimize the harm caused by the implant. Impulse-radio Ultra-WideBand (IR-UWB) enables Gb/s throughput with low power consumption and high integrability, due to its large available bandwidth and circuit optimization. One of the major design challenges of IR-UWB is that the transmit power density is limited to -41.3dBm/MHz to comply with the FCC spectral mask, while the energy per TX pulse needs to be high enough to ensure the transcutaneous data transmission. To alleviate this contradiction, modulation schemes with higher modulation order have been proposed [1–3]. [2] proposed Extended Multi-Pulse-Position Modulation (E-MPPM), achieving a modulation order of 3. However, the sync pulse in E-MPPM reduced the modulation order by 1/3. [3] improved the modulation order to 7 by introducing a 4PAM-8PSK-4PPM hybrid modulation, but it requires an initiative reduction of the TX pulse amplitude due to the use of PAM, resulting in a reduction of the transmission range. In addition, the 8PSK modulation used in [3] requires a high frequency 8-phase carrier with a power-hungry upconversion architecture. On the other hand, an all-digital transmitter with edge-combine technique features higher power efficiency [1], [2], [4], but the modulation order is limited to 1 to 3 due to the lack of phase modulation.

A Delay Line Based Fully-Digital Impulse Radio Ultra Wideband Transmitter

A 3.1&Amp;#x2013;4.8-Ghz Delay-Line-based Frequency-Hopping IR-UWB Transmitter in 65-NM CMOS Technology

Enhanced Bit Rate-Distance Product Impulse Radio Ultra-Wideband Over Fiber Link

Towards Ultrahigh Speed Impulse Radio THz Wireless Communications.

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

A CMOS Ultra-Wideband Impulse Radio Transceiver for Interchip Wireless Communications

A 3-5ghz Amplitude And Spectrum Tunable Impulse Radio Uwb Transmitter

A novel programmable ultra-wideband transmitter

An Ultra Low-Power Dual-Band IR-UWB Transmitter in 130-nm CMOS

A Dual-Carrier IR-based UWB Transmitter with Improved Spectral Efficiency

A 1.8gb/s, 2.3pj/bit, Crystal-Less IR-UWB Transmitter for Neural Implants

Design of a Low-Power, High-Data-Rate, and Crystal-Less All-Digital IR-UWB Transmitter for High-Density Neural Implants

A 132 Mb/s, 1bit 4224 M Samples/s Sub-Sampling, Low-Complexity and Energy-Efficient BPSK Transceiver for All-Digital 3–5 GHz IR-UWB

A 1.8Gb/s, 2.3pJ/bit, Crystal-Less IR-UWB Transmitter for Neural Implants.

0.15-Nj/b 3–5-Ghz IR-UWB System with Spectrum Tunable Transmitter and Merged-Correlator Noncoherent Receiver

A Fully Integrated BPSK Amplitude and Spectrum Tunable Transmitter for IR-UWB System

A 1.14mW 750kb/s FM-UWB transmitter with 8-FSK subcarrier modulation

A 90nm-CMOS, 500Mbps, fully-integrated IR-UWB transceiver using pulse injection-locking for receiver phase synchronization

A 1mb/s 3.2&#x2013;4.4ghz Reconfigurable FM-UWB Transmitter in 0.18&#x00b5;m CMOS

A power scalable and high pulse swing UWB transmitter for wirelessly-powered RFID applications

High data rate and energy efficient configurable IR-UWB transmitter with an integrated balun