Abstract:Abstract Due to the high conductivity and stability of silver, silver ink has been widely used in the field of printed electronics. However, since mechanical strain would cause the contact between key particles to be broken. Recently, higher requirements have been put on the bending resistance of silver paste. In this experiment, by preparing Ag NPs: Ag Flakes composite materials of 20:80 and 30:70 respectively, a new method for preparing stable modified flake silver powder is proposed, and the attachment and growth methods of Ag NPs reduced on micron flake silver powder is discussed. Flake silver powder, dispersant and reducing agent are added to the silver-ammonia complex, and the nano-silver particles are reduced on the flake silver powder by controlling the reaction conditions. When Ag + : Ag Flakes in the solution is 30:70, there is a clear interface between the silver particles and the silver flakes, and the size distribution range is between 10 and 100 nm; when Ag + : Ag Flakes is 20:80, the distance between the nano-silver particles and the silver plate crystal plane is about 0.222 nm and 0.260 nm, these spacings represent the (1–12) and (004) planes of Ag, respectively. The reduced silver particles grow on the surface of the silver sheet, the size is about 5 ∼ 60 nm, and form a sheet-point combination of shaped silver powder, which can be used to make conductive silver paste with cost and performance competitiveness. The reaction can be completed at room temperature (5 ∼ 25 °C) and atmospheric pressure (80 ∼ 100 kPa), the operation is simple, the reaction time is short, and it has a positive effect on the commercial production of printable highly conductive silver paste.

Preparation and Morphology of Silver Layer with Nano-sized Grain Structure

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology

Effects of Temperature and Current Density on Coating Microscopic Morphology in Cyanide-free Silver Plating

Preparation of Ag-Al2O3 nano-composites powder

Morphology and Composition Controlled Synthesis of Flower-Like Silver Nanostructures.

Preparation and Characterization of Silver Coated Hollow SnO2 Sphere with Open Structure

Study on the mechanism of forming silver nanoparticles on micron-scale flake silver powder

Synthesis of SnO_2 Powder Coated With Silver by Electroless Plating Method

Micro-nanoscale binary structured silver films fabricated by electrochemical deposition

Research Progress of the Controlled Preparation of Nano Silver with Various Morphologies

Preparation of Silver Nanoshells on Silica Particles by a Simple Two-step Process

Effect of the post-treatment in cyanide-free silver plating on the surface condition of the plated layer

Preparation and characterization of silica–silver core-shell structural submicrometer spheres

Step-by-Step Synthesis of Silver Nanoparticles and Their Surface Modification

Seedless and electroless plating of silver on silica particles by using microreactor

A Review on Diverse Silver Nanostructures

Preparation and Characterization of Ag Nanoshell on SiO2 Spheres via Electroless Plating Technique in Acidic Conditions

Deposition and wettability of silver nanostructures on Si(1 0 0) substrate based on galvanic displacement reactions

Facile process for surface metalization: Rational design of Ag nanoparticle/polymer brush toward high-efficiency electroless plating

Molecular Dynamics Simulation of Sintering Densification of Multi-Scale Silver Layer

Dextran-Controlled Crystallization Of Silver Microcrystals With Novel Morphologies