Abstract:Joint-preserving surgical treatment of complex unstable proximal humerus fractures remains challenging, with high failure rates even following state-of-the-art locked plating. Enhancement of implants could help improve outcomes. By overcoming limitations of conventional biomechanical testing, finite element (FE) analysis enables design optimization but requires stringent validation. This study aimed to computationally enhance the design of an existing locking plate to provide superior fixation stability and evaluate the benefit experimentally in a matched-pair fashion. Further aims were the evaluation of instrumentation accuracy and its potential influence on the specimen-specific predictive ability of FE. Screw trajectories of an existing commercial plate were adjusted to reduce the predicted cyclic cut-out failure risk and define the enhanced (EH) implant design based on results of a previous parametric FE study using 19 left proximal humerus models (Set A). Superiority of EH versus the original (OG) design was tested using nine pairs of human proximal humeri ( N = 18, Set B). Specimen-specific CT-based virtual preoperative planning defined osteotomies replicating a complex 3-part fracture and fixation with a locking plate using six screws. Bone specimens were prepared, osteotomized and instrumented according to the preoperative plan via a standardized procedure utilizing 3D-printed guides. Cut-out failure of OG and EH implant designs was compared in paired groups with both FE analysis and cyclic biomechanical testing. The computationally enhanced implant configuration achieved significantly more cycles to cut-out failure compared to the standard OG design ( p < 0.01), confirming the significantly lower peri-implant bone strain predicted by FE for the EH versus OG groups ( p < 0.001). The magnitude of instrumentation inaccuracies was small but had a significant effect on the predicted failure risk ( p < 0.01). The sample-specific FE predictions strongly correlated with the experimental results (R 2 = 0.70) when incorporating instrumentation inaccuracies. These findings demonstrate the power and validity of FE simulations in improving implant designs towards superior fixation stability of proximal humerus fractures. Computational optimization could be performed involving further implant features and help decrease failure rates. The results underline the importance of accurate surgical execution of implant fixations and the need for high consistency in validation studies.

Digital orthopedics technology in preoperative planning of implant fixation for intertrochanteric fracture

Minimally invasive percutaneous plate osteosynthesis with locking TCP versus dynamic condylar screw in the internal fixation of comminuted fracture of the distal femur

Locking Plate Fixation of Intertrochanteric Fractures in Patients with Deformed Proximal Femur

Pre-operative simulation using a three-dimensional printing model for surgical treatment of old and complex tibial plateau fractures

Auxiliary application of three-dimensional printing technology of implant fixation for tibial plateau fracture

Computational Study in Effects of Nail- and Plate-Implants on the Treatment of Pertrochanteric and Intertrochanteric Fractures

Accurate and Reliable Pose Recovery of Distal Locking Holes in Computer-Assisted Intra-Medullary Nailing of Femoral Shaft Fractures: a Preliminary Study.

Establishment of digital template of cannulated screw fixation for femoral neck fractures

Design of Well-Matched End-Structure of Anatomical Proximal Femoral Locking Plate Based on Computer-Assisted Imaging Combined with 3D Printing Technology: a Quality Improvement Study

Intraoperative radiographic analysis and adjustment of the optimal position of plate in high tibial osteotomy

A novel technology integrating robotics and 3D printing for closed reduction of tibia shaft fracture with MIPPO:A proof-of-concept study

Application of locking plate in the treatment of intertrochanteric femoral fracture

Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Comparison of Proximal Femoral Nail Antirotation and Anatomic Proximal Femoral Locking Plate in the Treatment of Intertrochanteric Fractures

Ability of modern proximal tibial lateral plates to capture posterolateral tibial plateau fracture fragments

Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair

Treatment of Trochanteric Fractures with Proximal Femoral Locking Plates

Treatment of Intertrochanteric Femoral Fracture with Locking Compression Plate

Preoperative Placement of Rigid Markers for the Treatment of Tibial Fractures Using 3D Printed External Repositioning Model Combined With External Fixator

Rapid Prototyping Combined with Finite Element Technology in the Application of the Intertrochanteric Fracture

Proximal femoral anatomical locking plate and autogenous iliac graft for failed primary internal fixation in treatment of femoral intertrochanteric fracture