Abstract:Cohesive zone models have been widely used to model interface crack initiation and propagation both in single-material media and bi-material systems. For single-material media with cohesive elements inserted into interface among segments, in order to ensure that the introduction of interface cohesive zone models does not affect the mechanical properties of single-material media before the softening stage of cohesive zone models, a selection criterion of stiffness of cohesive elements is proposed theoretically firstly based on the properties’ equivalence. Taking the softening stage into account, the mechanical responses of the overall stress-strain relationship of single-material media, for the cases of stable increase of strain and snap-back instability of strain, are both obtained, and the related energy mechanism are investigated. For bi-material systems with cohesive elements at interface between two materials, the thickness-dependent failure characteristics of systems in uniaxial tension are found, which is attributed to the difference of the releasing rate of elastic strain energy in the materials with different thicknesses. Furthermore, as a more complex application of cohesive elements, based on the selection criterion proposed, failure behaviors of the ceramic coating/substrate systems under three-point bending are modeled by finite element method and inserting cohesive elements into the coating segments and the coating/substrate interface simultaneously. The simulation results indicate the transition of dominated failure mode from coating cracking to interface delamination with increasing coating thickness, and show faster damage of thick coating systems, agreeing with experimental results. The effects of interface strength and toughness of cohesive elements on failure are also revealed. These results can provide guidance for the application of cohesive elements, and help us better understand the overall failure behaviors of interface systems.

The Structure Integrity Analysis of Solid Rocket Motor Grain with Cohesive Cavity

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Reliability analysis of the solidification cooling of solid rocket motor grain material

Study on Modeling Method for Failure of a Warren Structure under Whirligig Impact Load

Dynamic Response and Vibration Modes of Multi-Layer Wound Cylindrical Shell for Hydrogen Storage under External Blast Loading

A constitutive model of solid propellants considering aging and confinement pressure

Rapid Optimization Method of Solid Rocket Motor Propellant with Structural Strength

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Numerical Investigation on the Mechanism of Solid Rocket Motor Instability Induced by Differences between On-Ground and In-Flight Conditions

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model

Fracture Mechanism and Failure Criterion of S-07 Steel for Liquid Rocket Engine

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Research on the statistical damage constitutive model for composite solid propellant

Analysis of stress and strength of filament wound solid rocket motor case

Meso-viscoelastic Modeling of Solid Propellant Using XCT Technology and Virtual Element Method

Effects of non-uniform needled microstructure on failure mechanisms of 3D needled composites thick-walled cylinder under axial compression and internal pressure

Cohesive Models for Anti-Plane Mode Fracture in Dissimilar Structures: Effect of Small/Large Scale Yielding Conditions on Computed Fracture Load