Abstract:Solid propellant is a composite material exhibiting classic nonlinear viscoelastic mechanical characteristic, which is due in a large part to a cumulative damage process caused by the formation and growth of microflaws inside. The standard relaxation tests and uniaxial tension tests under different velocities of hydroxyl-terminated polybutadiene (HTPB) propellant are carried out in this paper, where Digital Image Correlation (DIC) technique is applied to record deformation. The experimental results show that the material mechanical behavior is rate-dependent. It is also observed that the yield stress and failure stress are significantly rate-dependent on the tensile velocity. Based on these experimental results, it can be inferred that the stiffness degradation and damage evolution of HTPB propellant are a rate-dependent processes. Therefore, the damage accumulation of HTPB propellant is considered rate-dependent in this research. In order to describe the mechanical characteristic precisely, a nonlinear viscoelastic constitutive model with rate-dependent cumulative damage is developed. The damage model is developed based on the concept of pseudo strain, in which a Prony series representation of viscoelastic material functions is applied. Besides, a rate-dependent damage variable is introduced into the model through considering the rate-dependent characteristics of cumulative damage process. In addition, a new normalized failure criterion is derived on the basis of the proposed damage model, which is independent of strain-rate after normalization. Finally, it is implemented in commercial finite element software for stress analysis to verify the predictive capacities of the damage model. The accuracy of the constitutive model and failure criterion is validated under uniaxial tensile tests of various strain rates.

Meso-viscoelastic Modeling of Solid Propellant Using XCT Technology and Virtual Element Method

A New Visco–elasto-Plastic Model Via Time–space Fractional Derivative

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Three-dimensional Modeling and Simulation of Asphalt Concrete Mixtures Based on X-ray CT Microstructure Images

Microstructural Simulations of Polymer Composites by a Viscoelastic Spring Lattice Model

A nonlinear viscoelastic constitutive model for cyclically loaded solid composite propellant

A multiscale approach for the development of a nonlinear viscoelastic friction-and-cavitation-based model for solid propellants

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Application of fractional calculus methods to viscoelastic behaviours of solid propellants

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

NEPE Propellant Mesoscopic Modeling and Damage Mechanism Study Based on Inversion Algorithm

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

A viscoelastic–viscoplastic constitutive model for polymer bonded explosives under low impact loading

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

Review of multi‐scale mechanical behavior research on composite solid propellants based on data‐driven approach