Abstract:In this paper, first, the meso-debonding process of a GAP/CL20/AP composite solid propellant under uniaxial tension was analyzed using the advantages of the material point method (MPM) and the finite element method (FEM) for the first time; then, the numerical simulation results were compared with the experiments. Based on the basic principle of modeling with the material point method, grains of different sizes were generated quickly and efficiently. Next, the grains were dispersed into particles, and the position information of the particles was mapped onto the background grid, so the background grids were used to determine the position of the grains. After that, the generated AP and CL20 grains were imported into the commercial software Abaqus through python scripting codes for numerical calculation. Based on macro-mechanical tests and a micro-numerical simulation, this paper studies the micro-internal mechanism that affects the macro-mechanical properties of composite solid propellants. Three interface parameters needed to be determined by parameter inversion, and the value of the objective interpolation function minR was 0.05078%. From a comparison, it was found that the numerical simulation results are in good agreement with the experimental results in the aspects of micro-crack cracking characteristics and the nominal stress–strain curve of propellants. After that, the influence of interface parameters on the stress–strain curve are discussed. The research in this paper has high scientific value and engineering application value and can provide important reference and guidance for the design of composite solid propellants and its mechanical property analyses, so as to solve the structural integrity problem of solid rocket motor charges.

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Cohesive Zone Modeling of Propellant and Insulation Interface Debonding

Multiscale Modeling of Heterogeneous Propellants from Particle Packing to Grain Failure Using a Surface-Based Cohesive Approach

Finite Element Modeling of Propellant and Inhibitor Interface Debonding

Modeling and Simulation of the Debonding Process of Composite Solid Propellants

Numerical Simulation of Solid Propellant Mesoscopic Damage Using Surface-Based Cohesive Approach

Viscoelastic Debonding Criterion-Based Interface for Modeling the Mechanical Behavior of Solid Propellants Subjected to Large Deformation

Numerical study of the influence of initial defects on the mechanical properties of composite solid propellants

A Constitutive Model of the Solid Propellants Considering the Interface Strength and Dewetting

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Cohesive zone method based multi particle finite element simulation of compaction densification process of Al and NaCl laminar composite powders

The Mesoscopic Numerical Simulation of GAP/CL20/AP Composite Solid Propellant Based on MPM and FEM

Correlation Between Solid Propellant Failure and Interface Debonding in Solid Rocket Motors

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Microstructural Simulations of Debonding, Nucleation, and Crack Propagation in an HMX-MDB Propellant

Design of the debonding propagation in burning propellant

Multiscale Viscoelastic Constitutive Modeling of Solid Propellants Subjected to Large Deformation

Microstructural Simulation of Initial Particle-Matrix Interfacial Defect in HTPB Solid Propellants

Modelling Microstructural Deformation and the Failure Process of Plastic Bonded Explosives Using the Cohesive Zone Model

An improved Mori-Tanaka method for nonlinear interface debonding in composite solid propellant