Abstract:To accurately characterize the mesoscopic properties of NEPE (Nitrate Ester Plasticized Polyether) propellant, the mechanical contraction method was used to construct a representative volume element (RVE) model. Based on this model, the macroscopic mechanical response of NEPE propellant at a strain rate of 0.0047575 s−1 was simulated and calculated, and the parameters of the cohesive zone model (CZM) were inversely optimized using the Hooke–Jeeves algorithm by comparing the simulation results with the results of the uniaxial tensile test of NEPE propellants. Additionally, the macroscopic mechanical behavior of NEPE composite solid propellants at strain rates of 0.00023776 s−1 and 0.023776 s−1 was also predicted. The mesoscopic damage evolution process of NEPE propellants was investigated by the established model. The study results indicate that the predicted curves are relatively consistent with the basic features and change trends of the test curves. Therefore, the established model can effectively simulate the mesoscopic damage process of NEPE composite solid propellants and their macroscopic mechanical properties.

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: accurately characterizing the mesoscopic properties of NEPE (nitrate ester plasticized polyether) propellant and studying its damage mechanism. Specifically, the author simulated and calculated the macroscopic mechanical responses of NEPE propellant at different strain rates by constructing a representative volume element (RVE) model, and optimized the parameters of the cohesive zone model (CZM) using an inverse optimization algorithm. In addition, this study also predicted the macroscopic mechanical behaviors of the propellant at other loading rates and analyzed the damage evolution process of the mesoscopic interface of the propellant. ### Main problem decomposition: 1. **Accurately characterizing the mesoscopic properties of NEPE propellant**: - Use the mechanical contraction method to generate an RVE model with the same particle size and volume fraction as the actual NEPE propellant. 2. **Studying the damage mechanism of NEPE propellant**: - Insert a bilinear cohesive element model to describe the component properties between the propellant particles and the matrix as well as within the matrix. - Through the simulation of the uniaxial tensile process, study the influence of interface stiffness, interface strength and interface failure displacement on the macroscopic mechanical properties of the propellant. - Use the Hooke - Jeeves inverse optimization algorithm combined with experimental and simulation data to invert and analyze the interface parameters. 3. **Verifying the accuracy of the model**: - Use the established model and inverted parameters to predict the macroscopic mechanical behaviors of the propellant at other loading rates. - Analyze the damage evolution process of the mesoscopic interface of the propellant to verify the accuracy of the model. ### Key technical means: - **RVE model construction**: Generate an RVE model based on the mechanical contraction method to ensure that the mesoscopic structure of the model is consistent with that of the actual propellant. - **Cohesive zone model (CZM)**: Use a bilinear cohesive element model to describe the interface properties and optimize the parameters through an inverse optimization algorithm. - **Numerical simulation**: Through finite - element calculation, simulate the uniaxial tensile process to study the macroscopic mechanical behavior and mesoscopic damage evolution of the propellant. ### Research significance: Through the above methods, this study can effectively simulate the mesoscopic damage process and its macroscopic mechanical properties of NEPE composite solid propellant, providing theoretical basis and technical support for the development and performance improvement of propellant.

NEPE Propellant Mesoscopic Modeling and Damage Mechanism Study Based on Inversion Algorithm

Damage characteristics and failure mechanism analysis of NEPE propellant at high strain rates

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

Experimental Investigation and Modeling the Compressive Behavior of NEPE Propellant under Confining Pressure

Uncovering the decomposition mechanism of nitrate ester plasticized polyether (NEPE): a neural network potential simulation

Long‐Term Creep Prediction of NEPE Propellant Based on SSM Method

Experimental Research on Tensile Mechanical Properties of NEPE Propellant under Confining Pressure

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Chemical behavior research of high-energy aerospace propellant with a mesoscale heterogeneous packing model

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

Mesoscale mechanics investigation of multi-component solid propellant systems

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

An SEM and EDS Study of the Microstructure of Nitrate Ester Plasticized Polyether Propellants

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

A Study on the Microstructure of A Nitrate Ester Plasticized Polyether Propellant Dissolved in Hcl and Koh Solutions

Mesoscale Dynamic Simulation on Phase Separation Between Plasticizer and Binder in NEPE Propellants

Simulating Loading-Unloading Hysteretic Behaviors of Nematic-Genesis Polydomain Nematic Elastomers

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model