Abstract:Current tests for plane stress characterization of fracture in automotive sheet metals include simple shear, uniaxial, plane strain, and biaxial tension, but there is a significant gap between shear and uniaxial tension. Presently, it remains uncertain whether the fracture strain experiences a reduction between simple shear and uniaxial tension or undergoes an exponential increase as the triaxiality decreases. Fracture in combined simple shear and tension is complicated by premature edge cracking in tension along with a strong sensitivity of fracture strain to the measurement lengthscale. To address these issues, several existing simple shear geometries were modified and evaluated, with a focus on obtaining approximately linear strain paths corresponding to combined uniaxial tension and simple shear suitable for experimental fracture characterization using digital image correlation (DIC). An experimental and numerical investigation was conducted using two planar geometries that do not require through-thickness machining and can be easily tested on a universal test frame. Finite-element analysis was used to investigate the influence of the notch eccentricity on the stress state and predicted fracture location. The most promising geometry in each coupon type was then selected and tested for a dual-phase advanced high-strength steel, DP1180. The performance of the two planar geometries was evaluated based on the linearity of strain and stress state, along with the location of fracture initiation. The best geometry was then used to evaluate and recalibrate the modified Mohr-Coulomb (MMC) fracture locus with data in combined shear and tension. The initial MMC calibration using four fracture tests that suppressed necking provided an accurate estimate for the fracture strain in combined uniaxial tension and simple shear. The MMC model correctly predicted a valley in the fracture strain between these two loading conditions.

Fracture Mechanism and Failure Criterion of S-07 Steel for Liquid Rocket Engine

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Fracture failure analysis on Alloy783 bolts in medium-pressure valve bonnets of USC units

Mechanism of Microscopic Fracture of Typical Shell Steel under Impact Loading

Study on ductile fracture behaviors of stainless steel S30408 and its weld

Strain rate and temperature‐dependent shear fracture mechanism of high‐energy propellant/liner interface zone

A Simple Calibrated Ductile Fracture Model and Its Application in Failure Analysis of Steel Connections

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

The Experimental Study on Fracture Process of Similar Rock Material with Different Ductility

Investigation of the Fracture Behavior of High-Strength Structural Steel and Welds Based on Micromechanical Models

Experimental and Numerical Analysis of an In-Plane Shear Specimen Designed for Ductile Fracture Studies

Elastic-Plastic Numerical Analysis of the Spinning Process of SA-372 Steel Used in High-Pressure Hydrogen Storage Cylinders (≥100 MPA)

Failure Analysis on Fracture of 16mn Steel

The Study and Application on Ductile Fracture Criterion of Dual Phase Steels During Forming

Mechanical responses and stress distribution of rock-like specimen containing a spherical defect under uniaxial compression

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence

Experimental and Numerical Fracture Characterization of DP1180 Steel in Combined Simple Shear and Uniaxial Tension

Characterization of ductile fracture criterion for API X80 pipeline steel based on a phenomenological approach

Simulation of Spall Fracture Based on Material Point Method

Size effects on the ductile/brittle fracture properties of the pressure vessel steel 20 g