Abstract:Because methanol can be synthesized from captured CO2 and green H2, it is a promising alternative fuel for reducing carbon emissions from heavy-duty vehicles. Experiments were conducted on a multi-cylinder port fuel injection spark-ignition (SI) heavy-duty pure methanol engine modified from a natural gas engine. The main objective was to evaluate the performance of a heavy-duty SI pure methanol engine and its improvement over the original natural gas engine. The effects of the exhaust gas recirculation (EGR) rate and spark timing on the brake thermal efficiency (BTE), as well as the NOx, CO and HC emissions, were investigated under a wide range of operating conditions. The experimental results indicated that the pure methanol engine had a BTE of > 40% BTE in a brake mean effective pressure (BMEP) range of 1.27-2.17 MPa at speeds ranging from 1000 to 1700 rpm and that the peak BTE was ~ 41.4%, which was higher than that of the original natural gas engine by an absolute 3%. The EGR tolerance of methanol engine was high and the coefficient of variation of the indicated mean effective pressure (COVIMEP) could be maintained below 2%, even at 31% EGR. With an increase in the EGR rate, the CO emissions first decreased and then increased. The partial oxidation of unburned methanol contributed to higher CO emissions when the EGR rate reached a critical value. Advancing the spark timing increased the HC emissions at a low EGR because of the lower post-oxidation temperature; however, it reduced the HC emissions at a high EGR rate because of the more stable combustion. At a BMEP above 0.87 MPa, the NOx, HC and CO emissions ranged from 0.055 to 1.185 g/kWh, from 2.4 to 13.05 g/kWh, and from 6.36 to 10.88 g/kWh, respectively. The pure methanol engine had lower NOx and CO emissions but higher HC emissions than the original natural gas engine.

Performance and Emissions Research of the High Compression Ratio Methanol Engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

An Experimental Study on a High Compression Ratio Methanol Engine

Study on the Performance of Methanol Engine

Performance and Emissions of A Diesel Engine Fuelled with Methanol

Experimental Evaluation of Performance of Heavy-Duty SI Pure Methanol Engine with EGR

Performance of a Methanol/Diesel Dual Fuel Engine

Effects of the Initial Flame Kernel Radius and EGR Rate on the Performance, Combustion and Emission of High-Compression Spark-Ignition Methanol Engine

The Combustion and Emission Characteristics of Pure Methanol As a Substitute Fuel for Compression Ignition Engines

Experimental Investigation of Diluents Components on Performance and Emissions of a High Compression Ratio Methanol SI Engine

Effects of Different Mixture Ratios of Methanol-Diesel on the Performance Enhancement and Emission Reduction for a Diesel Engine

Reduction of Emissions by Burning Bi-fuel of Diesel/Methanol on a Diesel Engine

Effects of Methanol Diesel Blends on Performance and Emissions of a Diesel Engine

High-Efficiency Methanol Engine Development for Heavy Commercial Vehicles

Effects of Methanol Direct Injection and High Compression Ratio on Improving the Performances of a Spark-Ignition Passenger Car Engine

Field Test on a Truck with Diesel/Methanol Compound Combustion Diesel Engine

Experimental Study on the Performance and Emission of Chinese Small Agricultural Diesel Engine Fuelled with Methanol/Biodiesel/DTBP

Experimental investigation on exhaust emissions of a heavy-duty vehicle powered by a methanol-fuelled spark ignition engine under world Harmonized Transient Cycle and actual on-road driving conditions

Improving the lean burn performance of a high compression ratio methanol engine by multiple-injection

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine