Abstract:The exceptional properties of methanol, such as its high octane number and latent heat of evaporation, make it an advantageous fuel for efficient utilization in dual-fuel combustion techniques. The aim of this study is to investigate the effect of direct methanol injection timing on the combustion, performance and emission characteristics of a dual-fuel spark ignition engine at different injection pressures. We conducted four different direct injection pressure tests ranging from 360° ahead to 30° CA ahead at 30° CA intervals. The experimental results indicate that regardless of the injection pressure, altering the methanol injection timing from −360° to −30° CA ATDC leads to distinct combustion behavior and changes in the combustion phase. Initially, as the injection timing is delayed, the combustion process accelerates, which is followed by a slower combustion phase. Additionally, the combustion phase itself experiences a delay and then advances. Regarding performance characteristics, both the brake thermal efficiency (BTE) and exhaust gas temperature (EGT) exhibit a consistent pattern of first increasing and then decreasing as the injection timing is delayed. This suggests that there is an optimal injection timing window that can enhance both the engine's efficiency and its ability to manage exhaust temperature. In terms of emissions, there are different trends in this process due to the different conditions under which the individual emissions are produced, with CO and HC showing a decreasing and then increasing trend, and NOx showing the opposite trend. In conclusion, regardless of the injection pressure employed, adopting a thoughtful and well-designed injection strategy can significantly improve the combustion performance and emission characteristics of the engine. The findings of this study shed light on the potential of methanol dual-fuel combustion and provide valuable insights for optimizing engine operation in terms of efficiency and emissions control.

Effects of Methanol Direct Injection and High Compression Ratio on Improving the Performances of a Spark-Ignition Passenger Car Engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Effects of the Initial Flame Kernel Radius and EGR Rate on the Performance, Combustion and Emission of High-Compression Spark-Ignition Methanol Engine

Effects of Methanol/Gasoline Blends on a Spark Ignition Engine Performance and Emissions

Assessment of the Effects of Intake Temperature and Injector Structure on the Combustion Characteristics of Direct‐Injection Spark‐Ignition Methanol Engines

Experimental Investigation of Diluents Components on Performance and Emissions of a High Compression Ratio Methanol SI Engine

Improvement of fuel economy of a direct-injection spark-ignition methanol engine under light loads

Potentials of Air-EGR Dilution for Improving Performance of a High Compression Ratio Spark-Ignition Engine Fueled with Methanol

Experimental Investigation on the Effects of Direct Injection Timing on the Combustion, Performance and Emission Characteristics of Methanol/Gasoline Dual-Fuel Spark Turbocharged Ignition (DFSI) Engine with Different Injection Pressures under High Load

Experimental study of effects of exhaust gas recirculation and combustion mode on combustion, emission, and performance of DME‐methanol ‐fueled turbocharged c ommon‐rail engine

Effects of Methanol-Gasoline Improved Fuel on the Performance of Gasoline Engine

Research on the Influence of Injection Strategies on the In-Cylinder Combustion Process and Emissions of Methanol

Improving the lean burn performance of a high compression ratio methanol engine by multiple-injection

Effects of Methanol to Diesel Ratio and Diesel Injection Timing on Combustion, Performance and Emissions of a Methanol Port Premixed Diesel Engine

Parametric Study on Effects of Methanol Injection Timing and Methanol Substitution Percentage on Combustion and Emissions of Methanol/diesel Dual-Fuel Direct Injection Engine at Full Load

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine

Effects of Spark Timing and Methanol Addition on Combustion Characteristics and Emissions of Dual-Fuel Engine Fuelled with Natural Gas and Methanol under Lean-Burn Condition

Effects of injection and spark timings on combustion, performance and emissions (regulated and unregulated) characteristics in a direct injection methanol engine

Experimental Evaluation of Performance of Heavy-Duty SI Pure Methanol Engine with EGR

The influence of exhaust gas recirculation coupling with fuel injection pressure on the combustion and emission characteristics of engine fueled with methanol-gasoline blends

Experimental Study on the Effect of Injection Strategies on the Combustion and Emissions Characteristic of Gasoline/methanol Dual-Fuel Turbocharged Engine under High Load