Abstract:The dynamic characteristics of the sliding bearing have great influences on the vibration and stability of the rotor-bearing coupled system. This study focus on a water lubricated bearing which supports the vertical rotor in a test facility. This rotor system is designed with maximum rotational speed of 5000 rpm and used to study the influence of water bearing on the rotor dynamics. Based on the unsteady computational fluid dynamics, a 3D model for the water film in the bearing with 3 grooves was built. The pressure oscillation in the water film was discussed. The dynamic characteristics including damping, stiffness and added mass of the bearing were calculated considering both the rotational effect and squeeze effect. The influences of the rotating speed of the shaft and prewhirl speed at water film inlet on the dynamic performance were also investigated. The results show that the instability of the film force on the journal is induced by the high-frequency vortexes in the grooves on the pad. At each rotational speed, the film force on the journal first decreases and then increase as the frequency ratio, while it increases with the increase of the rotational speed at each frequency. The rotational speed has great effects on the dynamic characteristics of bearing. Increasing the rotational speed contributes to strengthen the stability of the rotor system. The prewhirl velocity at the inlet has little impact on the dynamic characteristics and stability of the bearing. This study demonstrates the mechanism of lubrication dynamic characteristics of the siding bearing and shows the bearing nonlinear characteristics with the rotational speed. Using the CFD method to solve the water flow field is effective to predict the dynamic characteristics and can provide boundary conditions for the rotor dynamic analysis in the future study.

Influence of Surface Texture on the Stability of Spindle Supported by Sliding Bearing

Experimental investigation for vibration reduction of surface-textured journal bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Design and Optimization of the Surface Texture at the Hydrostatic Bearing and the Spindle for High Precision Machining

A Numerical Investigation of the Effects of Groove Texture on the Dynamics of a Water-Lubricated Bearing–Rotor System

Study of grease lubricated journal bearing with partial surface texture

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Optimization of surface texture distribution on the thrust bearing using the mass-conserving cavitation boundary condition: Theory and experiments

Tribological and dynamic performance analysis of rolling bearings with varied surface textures operating under lubricant contamination

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Dynamic modeling and characteristics analysis of cylindrical roller bearing with the surface texture on raceways

Performance evaluation of different types of micro-textured hydrostatic spindles under the main influencing factors

Study on the Flow Stability and Dynamic Characteristics of a Water Bearing

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

CFD analysis of load capacity of journal bearing with surface texture

Optimal Design of Surface Texture in Parallel Thrust Bearings

Dynamic characteristics of compound textured journal bearing

Effect of surface square textures on the physical field of static and dynamic pressure thrust bearings and multi-objective optimization

Optimal design of surface texture in meso scale air journal bearing

Numerical analysis of lubrication properties on a bio-inspired parabolic textured surface