Abstract:Many dynamic simulations of a rotor with a journal bearing employ non-linear fluid-film lubrication models and calculate the bearing coefficients at each time step. However, calculating such a simulation is tedious and computationally expensive. This paper presents a simplified dynamic simulation model of a vertical rotor with tilting pad journal bearings under constant and variable (transient) rotor spin speed. The dynamics of a four-shoes tilting pad journal bearing are predefined using polynomial equations prior to the unbalance response simulations of the rotor-bearing system. The Navier–Stokes lubrication model is solved numerically, with the bearing coefficients calculated for six different rotor speeds and nine different eccentricity amplitudes. Using a MATLAB inbuilt function (poly53), the stiffness and damping coefficients are fitted by a two-dimensional polynomial regression and the model is qualitatively evaluated for goodness-of-fit. The percentage relative error (RMSE%) is less than 10%, and the adjusted R-square () is greater than 0.99. Prior to the unbalance response simulations, the bearing parameters are defined as a function of rotor speed and journal location. The simulation models are validated with an experiment based on the displacements of the rotor and the forces acting on the bearings. Similar patterns have been observed for both simulated and measured orbits and forces. The resultant response amplitudes increase with the rotor speed and unbalanced magnitude. Both simulation and experimental results follow a similar trend, and the amplitudes agree with slight deviations. The frequency content of the responses from the simulations is similar to those from the experiments. Amplitude peaks, which are associated with the unbalance force (1 × Ω) and the number of pads (3 × Ω and 5 × Ω), appeared in the responses from both simulations and experiments. Furthermore, the suggested simulation model is found to be at least three times faster than a classical simulation procedure that used FEM to solve the Reynolds equation at each time step.

Exponential Model of Nonlinear Liquid-Film Force of Tilting-Pad Guide Bearing and Its Application

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

Establishment of Approximate Analytical Model of Oil Film Force for Finite Length Tilting Pad Journal Bearings

Nonlinear Dynamic Characteristics of A Large-Scale Tilting Pad Journal Bearing-Rotor System

Lubrication and stability analysis of nonlinear rotor-bearing system

The Method and Calculation Model of Dynamic Performances of Oil-film of Tilting-pad Bearing

A New Nonlinear Force Model to Replace the Hertzian Contact Model in a Rigid-Rotor Ball Bearing System

The Influence Of Pad Pivot Elastic Deformation On Static And Dynamic Coefficients For Fixed-Tilting Pad Journal Bearing

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

A Study of Linear and Non-linear Dynamic Performance for Tilting-Pad Thrust Bearing

A New Nonlinear Dynamic Model of the Rotor-Bearing System Considering Preload and Varying Contact Angle of the Bearing

Stability Analysis of Multi-Leaf Oil-Lubricated Foil Bearings with Back Springs Based on Nonlinear Oil Film Force Model

Performance Analysis of Tilting Pad Journal Bearing Considering Base Flexibility

Speed-Dependent Bearing Models for Dynamic Simulations of Vertical Rotors

Evaluation of Different Nonlinear Film Force Models for Journal Bearing

Nonlinear Dynamic Performance of Tilting-Pad Journal Bearing with Adjustable Elastic Pivot Design

Dynamic stiffness and damping coefficients of aerodynamic tilting-pad journal bearings

Analysis of Nonlinear Dynamic Behaviors of Rotor System Supported by Tilting-Pad Journal Bearings

Stability Analyses of Inclined Rotor Bearing System Based on Non-Linear Oil Film Force Models

An Analytic Model of Oil-Film Force on Hydrodynamic Journal Bearing of Finite Length