Abstract:Many dynamic simulations of a rotor with a journal bearing employ non-linear fluid-film lubrication models and calculate the bearing coefficients at each time step. However, calculating such a simulation is tedious and computationally expensive. This paper presents a simplified dynamic simulation model of a vertical rotor with tilting pad journal bearings under constant and variable (transient) rotor spin speed. The dynamics of a four-shoes tilting pad journal bearing are predefined using polynomial equations prior to the unbalance response simulations of the rotor-bearing system. The Navier–Stokes lubrication model is solved numerically, with the bearing coefficients calculated for six different rotor speeds and nine different eccentricity amplitudes. Using a MATLAB inbuilt function (poly53), the stiffness and damping coefficients are fitted by a two-dimensional polynomial regression and the model is qualitatively evaluated for goodness-of-fit. The percentage relative error (RMSE%) is less than 10%, and the adjusted R-square () is greater than 0.99. Prior to the unbalance response simulations, the bearing parameters are defined as a function of rotor speed and journal location. The simulation models are validated with an experiment based on the displacements of the rotor and the forces acting on the bearings. Similar patterns have been observed for both simulated and measured orbits and forces. The resultant response amplitudes increase with the rotor speed and unbalanced magnitude. Both simulation and experimental results follow a similar trend, and the amplitudes agree with slight deviations. The frequency content of the responses from the simulations is similar to those from the experiments. Amplitude peaks, which are associated with the unbalance force (1 × Ω) and the number of pads (3 × Ω and 5 × Ω), appeared in the responses from both simulations and experiments. Furthermore, the suggested simulation model is found to be at least three times faster than a classical simulation procedure that used FEM to solve the Reynolds equation at each time step.

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Experimental Analysis on Characteristics of the Rotor System Supported by Tilting-pad Journal Bearing Considering Pivot Stiffness and Damping

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation

Lubrication and stability analysis of nonlinear rotor-bearing system

Speed-Dependent Bearing Models for Dynamic Simulations of Vertical Rotors

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Dynamic performances of novel misaligned non-uniform distributed tilting-pad bearing

A New Nonlinear Dynamic Model of the Rotor-Bearing System Considering Preload and Varying Contact Angle of the Bearing

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Thermo-elastohydrodynamic Lubrication Analysis on Multi-tilting-pad Journal Bearing

Stability of bearing-rotor system with different bearing structures

A Comprehensive Dynamic Model to Investigate the Stability Problems of the Rotor–bearing System Due to Multiple Excitations

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

Thermoelastohydrodynamic Analysis of the Static Performance of Tilting-Pad Journal Bearings with the Newton–Raphson Method

Theoretical and experimental studies on dynamics of double-helical gear system supported by journal bearings

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads