Abstract:<p>Vapor refrigerant injection technique can effectively improve the performance and heating capacity of the rotary compressor heat pump systems in cold regions. However, due to the arrangement of the check valve at the injection port of the rotary compressor, the compressor manufacturing process needs to be improved to a large extent, which prevents the application of the vapor refrigerant injection technique. The manufacturing process of the vapor injection rotary compressor using a circular end-plate injection port without check valve is very simple. In order to avoid the backflow in the injection process and affect the performance of the compressor, the general expressions of the envelopes and the effective injection areas of the injection ports are developed based on an analytical geometry method in this paper. Meanwhile, a numerical model for predicting the performance of the vapor injection compressors is proposed. The effects of different operating conditions, different end of injection rotation angles, and different injection port radii on the upper and lower limits of injection pressure, injection ratio, and the system performance were analyzed. According to the prediction results, the optimal design scheme of the injection compressor using a circular end-plate injection port without check valve is proposed. The results indicate that at low ambient temperatures, the optimal design of the injection port structure has increased the heating capacity 12.1–28.3% over the traditional compressor without injection, and COP also has been increased 1.6–3.6%.</p>

Method of Performance Test for Refrigeration Compressor With Vapor Injection and Advice for Standard Setting

A Standard Test Method of the Cycling Performance of Refrigerants and Its Application Research

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

The new refrigeration system with vortex tube and ejector

Performance Testing of Linear Compressors with Rc Approach

Experimental Study on Vapor Injection Refrigeration System With Two-stage Rolling Piston Compressor

Working Performance of R-32 Two-Stage Compression System in Domestic Air-Conditioner

Performance investigation and optimization analysis for vapor injection rotary compressor oriented to circular end-plate injection port without check valve

Experimental Research on Vapor-Injected Rotary Compressor Through End-Plate Injection Structure with Check Valve

Performance Investigation of Vapor Compression Cycle with a Variable Speed Compressor and Refrigerant Injection

Performance Analysis of a Vapor Injection Linear Compressor in a Dual-Temperature Zone Refrigerator

Theoretical study on the application of isothermal compression technology in vapor‐compression refrigeration systems with an isothermal piston

Performance testing with RC load approach in linear compressors

Performance investigation and design optimization of a vapor injection rotary compressor without check valve in injection path

Simulation Study on Single-machine Two-chamber In-parallel Compression Refrigeration/Heat Pump System

Design of experimental bench and internal pressure measurement of scroll compressor with refrigerant injection

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Upper-limit of Performance Improvement by Using (quasi) Two-Stage Vapor Compression