Abstract:The spectral characteristic of materials is the key factor of the photothermal microactuator's performance. The present article introduces the operating principle, and analyzes the relationship between the material spectral characteristic and its expansion. As the photothermal microactuator is an innovative microactuator based on photothermal expansion that absorbs the laser energy and converts it into internal energy to realize the microdrive, the optimal photothermal expansion material with proper absorption spectrum characteristic matching the spectrum of light driving source needs to be found. The reflection and absorption spectra of four types of polymeric material, including PVC, HDPE, LDPE and PET, were obtained by using the single integrating sphere method. The results indicate that the reflection spectrum of the dyed high-density polyethylene (HDPE) is of double-peak structure in visible band, and there is strong absorption within the range of 600-690 nm, which means it would match the light driving source quite well in the broad spectral range. Therefore, HDPE was chosen as the photothermal expansion material. In order to check out the feasibility and performance of the photothermal microactuactor based on HDPE, a prototyping microactuator 1 500 mm in length and 30 mm in thickness was manufactured by using an excimer laser micromachining system. With a laser diode (10 mW/650 nm) as the external power source to activate the microactuator, performance measurement experiments were carried out by using a self-produced video movement measurement system with a CCD-coupled microscope. The experiment results demonstrate that the deflection of the microactuator reaches 18.7 mm at 10 mW of laser power, showing that the characteristics of spectral absorption and light-heat transition are quite well at 650 nm. This novel photothermal microactuator has simple structure, adjustable displacement output, and more mobility, and can be controlled remotely, so it will be quite useful for applications in the fields of micro-optical-electro-mechanical systems (MOEMS).

Review of Thermal Bubble Micro-actuators for Micro-fluidics

Novel Microfluid Actuator Based On Marangoni Effect

Microfluid oscillator based on thermo-capillarity

Actuation Mechanism of Microvalves: A Review

Microfluidic Approaches for Microactuators: From Fabrication, Actuation, to Functionalization

Analysis and experimentation of novel asymmetric photo-thermal micro-actuator

Design and Research of the Point-Contact Optothermal Microactuator

Dynamic characteristics of micro-optothermal expansion and optothermal microactuators

Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

Theoretical Modeling of Microscopic Photothermal Expansion and Experimental Study of Photothermal Microactuators

Thermally Actuated Membrane Micropump

Study of New Photothermal Microactuator Based on Micro/nano Scale Photothermal Expansion

MEMS actuators for biomedical applications: a review

Theoretical and Experimental Studies of a PDMS Pneumatic Microactuator for Microfluidic Systems

Vertebral haemangiomas. A report of 2 cases.

Dynamic Thermal Characterization of MEMS Electrothermal Actuators in Air

Development of Photothermal Microactuator Based on Spectral Analysis of Photothermal Expansion Material

Energy-saving, High-Pressure Resistant Mini Valve Based on a Bistable Electromagnetic Actuator

Photothermal Microactuators Fabricated by LIGA Technology

The application of micro field theory to MEMS actuators