Abstract:The experimental study of natural convection for solar collectors with different coating materials and being equipped with guide plate is carried out step by step through the experimental platform of solar-assisted fuel cells under the research background of renewable total energy systems, which mainly include solar energy comprehensive utilization, solid oxide fuel cells, gas turbine and Kalina refrigeration cycle. The three-dimensional mathematical model on natural convection and forced convection of solar collectors is established to study the flow and heat transfer data with the field synergy and entransy principle on the basis of experimental verification. The natural convection results show that the thermal efficiency and the entransy increment rise gradually with the absorption rate increasing from 0.95 to 1.0 and the emission rate decreasing from 0.06 to 0.16, and the thermal efficiency of experiment for high absorption is 1.17% higher than that of low absorption. The thermal efficiency of experiment for solar collectors increases by 2.17% after equipped with guide plate, because the mixed flow in the vacuumvacuum tube disappears and the guide plate strengthens the flow at the bottom of the vacuum tube. The reasonable plate thickness of guide plate for all-glass vacuum tube water heaters is 2 mm, the reasonable plate length of guide plate is 60-100 mm distance from the bottom of the vacuum tube, and the reasonable position of guide plate is 16-20 mm above the axial line of the vacuum tube. The forced convection results show that the Reynolds number and the Nusselt number decrease gradually after the fluent flow into manifold but the Reynolds number and the Nusselt number increase gradually at the exit of manifold. Although the fluent is extremely volatile along the vacuum tube, the Reynolds number and the Nusselt number of horizontal double collectors are higher than that of vertical single collector. The angle between speed vector and temperature gradient vector is 0° with downward fluid and 180° with upward flow, because the collector overall temperature is gradually reduced from vacuum tube bottom to manifold. It makes more fluid absorb the bottom heat, because the internal flow of vacuum tube is smooth and the mixed flow in vacuum tube disappears. Manifold velocity gradually decreases because there is backflow interiorly, but temperature increases because fluid absorbs solar radiation, and the field synergy in collector outlet is higher than others because temperature field is consistent with velocity field according to numerical simulation. Although the entransy increments of vertical single collector and horizontal double collectors are negative values in initial period, they gradually rise with the heat time increasing. There are 2 parts for entransy dissipation in the vacuum tube. The entransy dissipation of horizontal double collectors (from 0.2 to 1.8 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is to give heat flux boundary. The entransy dissipation of horizontal double collectors (from 0 to 0.2 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is constant temperature when hot water in vacuum tube flows into water tank and heat transfer occurs between hot and cold water. Enhancement of heat transfer effect of horizontal double collectors is better than that of vertical single collector, because its entransy increment is higher than that of vertical single collector and its entransy dissipation is better than that of vertical single collector. It is determined that the solar collectors with guide plate can be adopted in natural convection and the horizontal double collectors can be employed in forced convection in the thermal field of solar-assisted fuel cells with low and medium temperature.

The analysis and testing of thermal performance on solar evacuated tube

Experimental and simulation study for all-glass evacuated tube solar water heaters

Experimental Analysis of Wet Gas-Liquid Water Mixture Within the Tank of Water in Glass Evacuated Tube Solar Water Heater

Experiment and numerical simulation on flow and heat transfer in all-glass evacuated tube solar collectors

Thermal and Hydrodynamic Performance of an Improved Passive Solar Water Heater Equipped with Asymmetric U-type Evacuated Tubes

ANALYSIS OF THERMAL PERFORMANCE OF EVACUATED TUBULAR SOLAR AIR COLLECTOR WITH INSERTED TUBES

Numerical Simulation and Experimental Study of the Tube Receiver's Performance of Solar Thermal Power Tower

The Numerical Simulation Study on Influencing Factors in All-Glass Evacuated Tube Solar Water Heater

Experiment and simulation for convective heat transfer in all-glass evacuated tube solar collectors

PERFORMANCE OF HEATING AND REFRIGERATIONAND ECONOMIC ANALYSIS OF SOLAR-POWEREDEVACUATED TUBE ADSORBER

Performance Analysis on A Novel Micro-Channel Heat Pipe Evacuated Tube Solar Collector-Incorporated Thermoelectric Generation

EXPERIMENTAL STUDY ON THERMAL LOSS OF SOLAR EVACUATED TUBE COLLECTOR

Thermal performance of two evacuated tube solar collectors with flat heat pipes

Comparative Experimental Analysis Of The Thermal Performance Of Evacuated Tube Solar Water Heater Systems With And Without A Mini-Compound Parabolic Concentrating (Cpc) Reflector(C < 1)

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection

Experimental Research of Heating and Refrigeration of Solar Cooling Tube

Thermal performance investigation of the newly shaped vacuum tubes of parabolic trough collector system

Experimental study and simulation analysis on solar water heater system

Simulation and Economic Analysis of a Solar-Powered Adsorption Refrigerator Using an Evacuated Tube for Thermal Insulation

Experimental Study of a Novel Testing Platform for the Thermal Performance of Solar Domestic Water Heating Systems

Three-dimensional Numerical Study of Heat Transfer Characteristics in the Receiver Tube of Parabolic Trough Solar Collector