Abstract:Barium calcium titanate (BCT) ceramics with varying yttrium doping concentrations were fabricated using the solid-state compaction process to explore the attributes of dopants. (Ba0.75Ca0.25) TiO3 and (Ba0.75Ca0.25) (YyTi(1-y)) O3 where, y = 0.00, 0.10, 0.15, and 0.20 ceramics were synthesized by pressing isostatically in pellet press apparatus, then sintered at 1250 °C with consequent cooling in furnace ambient. The structural, morphological, and dielectric properties were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and impedance spectroscopy interpretations, respectively. The XRD analysis revealed that the cubic BCT lattice was transformed into a tetragonal structure with Yttrium doping. Scanning electron microscopy (SEM) disclosed that yttrium doping countered the liquid phase formation of BCT as well as influenced grain development and microstructure, leading to the formation of distinct grain boundaries and improved densification. The average grain size (18-29 nm) of the Y-BCT increases as the doping level rises. At 60 Hz, it was reported that the dielectric constant obtained a maximum value of 70000 with a resistivity of 5 × 108 Ώ-cm for y = 0.15. The manifestation of the secondary phase confirmed from XRD, allocating an easy path for oxygen migration, might be responsible for the rise in oxygen vacancy, higher leakage current, and dielectric loss for y = 0.01. Co-doping of calcium and yttrium in BCT ceramics has modified the basic structure and ameliorated composites' structural stability and dielectric characteristics. The optimized sample, upon demonstrating outstanding efficiency, ought to be employed for specific uses such as energy storage devices and capacitors.

The Influence of Doping Ta on the Properties of BaCe0.8In0.1Y0.1O3-δ Electrolyte

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Influence of anode pore forming additives on the densification of supported BaCe0.7Ta0.1Y0.2O3-δ electrolyte membranes based on a solid state reaction

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Conductivity of Bi-Doped Ba0.6Sr0.4CeO3 Electrolyte Materials

Preparation and Conductivity Properties of Ta5+ Doping BaCeO3 Ceramics

Improved Dielectric and Energy Storage Properties of Ba0.8Ca0.2TiO3 Ceramics by Doping Ba(Mg1/3Nb2/3)O3

Effects of Chemical Modification on the Structural and Electrical Properties of (ba0.90ca0.10)0.90(na0.5bi0.5)0.10tio3 Ceramics

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition

Basic properties of low thermal expansion coefficient (Y0.5Ca0.5)1−xInxBaCo3ZnO7+δ (x=0, 0.1, 0.2, 0.3) solid solutions for solid oxide fuel cell cathode materials

Structure and Electrical Conductivity of BaCe0.7In0.1A0.2O3−δ (A = Gd, Y) Ceramics

Study on La and Y co-doped ceria-based electrolyte materials

Ionic Conductivity, Sintering and Thermal Expansion Behaviors of Mixed Ion Conductor BaZr0.1Ce0.7Y0.1Yb0.1O3−δ Prepared by Ethylene Diamine Tetraacetic Acid Assisted Glycine Nitrate Process

Samarium and Yttrium Codoped BaCeO3 Proton Conductor with Improved Sinterability and Higher Electrical Conductivity

Densification Behavior and Space Charge Blocking Effect of Bi2o3 and Gd2o3 Co-Doped Ceo2 As Electrolyte for Solid Oxide Fuel Cells

Influence of La and Y Codoping on the Behaviors of BaTiO_3-based PTC Ceramics

Investigation on the Microstructure and Dielectric Properties of Batio3-Nb2o5-Fe2o3 Materials Doped with La2o3

Effect Of Ba Nonstoichiometry On The Phase Composition, Microstructure, Chemical Stability And Electrical Conductivity Of Baxce0.7zr0.1y0.1yb0.1o3 (-) (Delta) (0.9 <= X <= 1.1) Proton Conductors

Large electrostrain and high energy-storage properties of (Sr1/3Nb2/3)4+-substituted (Bi0.51Na0.5)TiO3-0.07BaTiO3 lead-free ceramics