Abstract:The research reported in this paper is to investigate the effects of externally bonded CFRP sheets on flexural performance of beams subjected to different levels of sustaining load. To this end, a series of 16-RC beams retrofitted with CFRP sheets and 2 control beams were tested, and the theoretical analysis was conducted to explain the experimental phenomena and test results. The experimental parameters include rebar ratio, number of plies of CFRP laminates and sustaining load level at the time of retrofitting. This paper presents a detailed analysis on the sustaining load levels that may have significant influence on the flexural behavior of the strengthened RC beams. Both the experimental and analytical results indicated that the stiffness of all the strengthened beams had been increased evidently as compared to that of the control beams. This phenomenon implies that FRP played an important role to increase the stiffness, thus reduce the deflections of the strengthened beams. The sustaining loads have an obvious effect on the stiffness of the strengthened beams, especially on the average tangent stiffness at post-cracking stage. The experimental and analytical results in this paper are novel, and the findings may be considered for possible adoption into the design codes, also for practical engineering applications.

Fatigue performance of foam-filled sandwich composite beams with web enhanced

An Experimental Investigation of Static and Fatigue Behaviour of GFRP Sandwich Beams with a Web Reinforced Wood Core

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Experimental Study on Composite Sandwich Beams with Longitudinal GFRP Webs

Experimental research on flexural fatigue behavior of GFRP-Balsa sandwich beams

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Flexural Fatigue Behavior and Life Prediction of Web Reinforced GFRP-balsa Sandwich Beams

EXPERIMENTAL INVESTIGATION ON FLEXURAL BEHAVIOR OF REINFORCED FOAM SANDWICH BEAMS WITH TWO-WAY LATTICE-WEB

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Flexural responses and pseudo-ductile performance of lattice-web reinforced GFRP-wood sandwich beams

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

Flexural Performance of Sandwich Beams with Lattice Ribs and a Functionally Multilayered Foam Core

Static and Fatigue Performance of Reinforced Concrete Beam Strengthened with Strain-Hardening Fiber-Reinforced Cementitious Composite

An Investigation on Mechanical Behavior of Tooth-Plate-Glass-Fiber Hybrid Sandwich Beams

Flax, Basalt, E-Glass FRP and Their Hybrid FRP Strengthened Wood Beams: An Experimental Study

Advances in Fatigue Performance of Steel- Concrete Composite Beams

Flexural behaviors of GFRP-wood sandwich beams with recycled wood formwork cores

An investigation of Fatigue Behavior and Residual Strength Model of Steel-GFRP Composite Bar

Fatigue behaviour of notched steel beams strengthened by a self-prestressing SMA/CFRP composite

Mechanical Performance of Foam-Filled Lattice Composite Panels in Four-Point Bending: Experimental Investigation and Analytical Modeling

Study on Fatigue Performance of Reinforced Concrete Beams Strengthened with BFRP Sheet