Abstract:To investigate the effect of yttrium (Y) on microstructure refinement and mechanical properties of aluminum alloy A356.2, the different trace contents of Y (0 wt%, 0.025 wt%, 0.050 wt%, 0.075 wt%, or 0.100 wt%) were introduced into the liquid alloy. The alloys were fabricated in a preheated permanent mold, and subsequently treated by a T6 heat treatment. The results of tensile testing indicate that the yield strength (YS), the ultimate tensile strength (UTS) and the elongation (El) of the A356.2 alloy are improved by the Y additions. The YS dependence on grain size for the test alloys follows the Hall–Petch equation, which gives \({\text{YS}} = - 354.1 + {2875}{\text{.2}}d^{ - 1/2}\) with a correlation of R2 = 0.83. As 0.050 wt% Y is added, the optimum values of the YS, UTS and El are achieved after T6 heat treatment. The secondary phases were identified by X-ray diffraction (XRD) which mainly consisted as Si, Mg2Si and Al3Y. The scanning electron microscope (SEM) and energy-dispersive spectrometer (EDS) analyses reveal the presence of the nano-sized Al3Y particles on the surface of the Si phase. The A356.2 alloy with the Y addition is strengthened by the dendritic refinement, and the presence of the micron- and nano-sized Al3Y precipitates.

Nano-crystallization and Mechanical Properties of Y Addition Ti40Zr25Cu9Ni8Be18 Amorphous Alloy

Effect of Sn and Al Additions on the Microstructure and Mechanical Properties of Amorphous Ti–Cu–Zr–Ni Alloys

Effect of Yttrium Addition on Microstructures and Room Temperature Tensile Properties of Ti-47 Al Alloy

Effect of Nano Y2O3 Addition on Microstructure and Room Temperature Tensile Properties of Ti–48Al–2Cr–2Nb Alloy

Influence of niobium and yttrium on plastic deformation energy and plasticity of Ti-based amorphous alloys

Influence of Nano-Y2o3 Addition on Microstructure and Tensile Properties of High-Al TiAl Alloys

Amorphous-forming Ability and Crystallization Behavior of Mg_(80)Cu_(15)Y_5 Alloy

Effect of Y on Microstructure and Mechanical Properties of A Ti Alloy

Significant Enhancement in High-Temperature Tensile Strength of Trace Nano-Y2o3-reinforced TiAl Alloy Prepared by Selective Electron Beam Melting

Effect of Yttrium on Microstructure and Mechanical Properties of ZAlSi7Mg Alloy

Effects of Yttrium Addition on Thermoplastic Formability of Zr-Cu-Ni-Al Amorphous Alloy under Non-Isothermal Condition

Microstructure and hot deformation behavior of the Cu-Sn-Ni-Zn-Ti(-Y) alloy

Microstructural evolution and mechanical property of Al–Zr and Al–Zr–Y alloys

Effect of Y Addition on Microstructure and Martensitic Transformation of a Ni-rich Ti–Ni Shape Memory Alloy

Influence of Yttrium on Microstructure, Mechanical Properties and Deformability of Ti–43Al–9V Alloy

Microstructure and mechanical properties of Cu-Ni-Sn alloy regulated by trace rare earth element Y

Microstructure and Mechanical Properties of As-Cast Mg-2Nd-0.2Zn-0.4Zr-xY Alloy

Nano-yttrium-containing precipitates of T6 heat-treated A356.2 alloy when trace yttrium (Y less than 0.100 wt%) added

Effect of rare earth y on microstructures and mechanical properties of Ti-45Al-5Nb alloy

Effect of yttrium addition on microstructural evolution and high temperature mechanical properties of Ni-based superalloy produced by selective laser melting

Effects of Yttrium on Microstructures and Properties of Ti-17Al-27Nb Alloy