Abstract:Polymer composites with highly thermally conductive and electrical insulation are urgently demanded for thermal management in modern electrical and energy applications. However, the incorporation of metal fillers in traditional polymeric composites usually fails to meet the requirements for simultaneously high thermal conductivity and high electrical insulation. Here, we successfully fabricated composites with high thermal conductivity and high electrical insulation by in situ thermal expansion of expandable graphite (EG) and in situ oxidation of aluminum (Al) nanoflakes in aluminum-plastic package waste (APPW). Due to the synergistic effect of the hybrid filler framework, the maximum thermal conductivity reached as high as 8.7 W m–1 K–1 for APPW/EG10/Al60-F composites. In addition, the formation of the nano Al2O3 layer around the Al filler surface brings extremely low electrical conductivity (<10–14 S cm–1) and low dielectric loss (<0.06). Based on the results of finite element simulation, the heat flowed mainly along the effective filler framework and the high thermal conductivity is attributed to the interconnection of the high aspect ratio filler. Furthermore, the strong thermal management capability of the prepared composites was demonstrated in the heat dissipation experiment. The present work suggests that surface-oxidized Al nanoflakes demonstrate fascinating performance and show promising application as thermal management materials in emerging electrical systems and electronic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18603?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18603</a>.SEM images of expandable graphite (Figure S1); FTIR absorbance data of carbon dioxide in APPW/EG/Al-F composites (Figure S2); XRD pattern of the APPW/EG composite prepared by melt blend under 200 °C (Figure S3); TGA and DTG curves of APPW/EG/Al composites (Figure S4); SEM images of the fracture surface of composites (Figure S5); TEM images of graphite nanosheets in APPW/EG10/Al30-F composites (Figure S6); TEM images of as-received Al platelet (Figure S7); volume resistivity of APPW/EG composites (Figure S8); APPW/EG10/Al60-S at different cooling times at insulating foam within 1 min (Figure S9); dielectric permittivity and dielectric loss of composites at 1k Hz (Figure S10); dielectric permittivity, dielectric loss, and electric conductivity of composites at different temperatures at 1k Hz (Figure S11); list of samples and their codes for different EG and Al loadings (Table S1); calculated electrical conductivity, electronic thermal conductivity, and phonon thermal conductivity of composites (Table S2); major parameters used in the simulation (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18603/suppl_file/am0c18603_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Aluminum Filled Polyethylene-based Thermally Conductive High Performance Composites Prepared by Solid State Shear Milling

Polymer Composite with Enhanced Thermal Conductivity and Insulation Properties through Aligned Al2O3 Fiber

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

Composite Materials Based on Al2O3 with a Two-Layer Polymer Coating of Ultra-High Molecular Weight Polyethylene and Polyethylene: Synthesis, Properties, and Processing by 3D Printing by Selective Laser Sintering

Preparation of polypropylene-based thermally conductive composites via multiple injection compression molding method

Highly Filled Composite Materials Based on UHMWPE and a Mixture of Micron and Nanoscale Aluminum Particles

Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods

GMP/Al2O3/ZnO/PDMS thermal interface materials with anisotropic thermal conductivity and electrical insulation ability obtained by 3D‐printing method

Highly Thermally Conductive and Superior Electrical Insulation Polymer Composites via In Situ Thermal Expansion of Expanded Graphite and In Situ Oxidation of Aluminum Nanoflakes

Properties and effect of preparation method of thermally conductive polypropylene/aluminum oxide composite

An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion

Thermally conductive high‐voltage insulation composites with outstanding comprehensive properties through particle grading design

The combination of AlN and h‐BN for enhancing the thermal conductivity of thermoplastic polyurethane composites prepared by selective laser sintering

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology

Hybrid of multi‐dimensional fillers for thermally enhanced polyamide 12 composites fabricated by selective laser sintering

Green recycling of aluminum plastic packaging waste by solid‐state shear milling and 3D printing for thermal conductive composites

Microstructure, mechanical properties and heat-resistance properties of bismaleimide composites modified synergistically by alumina and two kinds of thermoplastic resins

Interface, thermal, and Fourier transform—infrared spectroscopy investigation on polylactic acid/polyhydroxyalkanoate composites with silane‐treated aluminum particles and intercalated montmorillonite inclusions for semiconductor devices

Breaking graphite through a ball-milling process: the thermal conductivity and mechanical properties of polyethylene composites

Highly thermally conductive polymer-based composites with 3D exfoliated BNNS/functionalized SiC networks prepared by rapid solidification and hot pressing