Abstract:Even for ultra deep sea applications, pressure housings using ceramics can obtain positive buoyancy because ceramics typically have an outstanding compressive strength-to-weight ratio and elastic modulus. Nevertheless, ceramic housings have not been used widely to date because their characteristics as brittle materials complicate design efforts. This article presents a design method for a ceramic tube pressure housing applicable to ultra deep sea usage, particularly addressing the material properties of the metal end caps which contact the bearing surface of the ceramic tube. The housing consists of aluminum alloy end caps and a ceramic tube with wall thickness determined using a critical buckling equation for infinite cylinder length. The cap design uses only the conventional method for metal housing without a special design for reducing tensile stress on the ceramic cylinder. An investigation based on plastic contact mechanics indicates that aluminum alloy caps that have lower yield strength and an elastic and tangent modulus than those of other metals reduce tensile stress at the ceramic tube end via reduction of the contact pressure. Furthermore, nonlinear finite element analysis results indicate only slight tensile stress on the end surfaces of the ceramic tube and provide markedly low tensile failure probability. Comparison to simulated results with the titanium alloy cap model highlights the aluminum alloy cap's effectiveness at reducing tensile stress on the ceramic tube end. The reliability of this simple and easily introduced design method for ceramic tube housings is demonstrated through pressure testing and observations.

Strength Analysis of Β″-Al2o3 Ceramics Tubes for Energy Storage Sodium Sulfur Batteries

Analysis of Hydrostatic Pressure Bursting Test on Β "-Al2o3 Ceramics Tubes for Energy-storage Sodium-sulfur Batteries

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

In situ study on bending modulus of Al2O3nanotubes prepared by atomic layer deposition

Strength and Fatigue Analysis of Tube-Sheet Subjected to Thermal Shock

Simulation Study on Coil of Biomass Carbonization Kettle

Numerical Analysis of Thermal Shock Cracking Behaviors of Ceramics Based on the Force-Heat Equivalence Energy Density Principle

Strength damage behavior analysis of silicon carbide(SiC) ceramic cylindrical shells under hydrostatic pressure based on the state-based peridynamics

Thermo-chemo-mechanical Analysis of Protonic Ceramic Electrolysis Cell: A Statistically-Designed Numerical Study

Analysis, Simulation and Experimental Study of the Tensile Stress Calibration of Ceramic Cylindrical Pressure Housings

Understanding the Effect of Microstructure on the Failure Behavior of Additively Manufactured Al 2 O 3 Ceramics: 3D Micromechanical Modeling

Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design

Temperature field evolution of cylindrical battery: In-situ visualizing experiments and high fidelity internal morphology simulations

A NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON TOUGHENING DESIGN OF MULTILAYER CERAMIC

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Microstructure Evolution and Mechanical Behaviors of Alumina-Based Ceramic Shell for Directional Solidification of Turbine Blades

Study of Bearing Capacity of Aluminum Alloy Thin-Walled Circular Tube Filled with Lightweight Filler

Modeling and prediction of structural/thermophysical properties of sintered NiO/YSZ anode for SOFC by molecular dynamics method

Simulation and Analysis of Sintering Warping and Thermal Stress for a Cermet Half-Cell of Solid Oxide Fuel Cells

Simple Design Method for Ceramic Tube Pressure Housings