Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Simulation and Analysis of Sintering Warping and Thermal Stress for a Cermet Half-Cell of Solid Oxide Fuel Cells

Simulation and Analysis of Thermal Stress and Sintering Warpage of Planar Solid Oxide Fuel Cells

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Modeling of Solid Oxide Fuel Cell Sintering Stress and Deformation

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Real-time deformation and stress response of the planar SOFC during sintering

Modeling and prediction of structural/thermophysical properties of sintered NiO/YSZ anode for SOFC by molecular dynamics method

Modeling of cooperative defect transport and thermal mismatch in a planar solid oxide fuel cell

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Coarse-grained molecular dynamics modeling and parameter analysis for sintered interface structures in sandwiched tri-layers reversible solid oxide fuel cell

Numerical Investigation of Heat/Flow Transfer and Thermal Stress in an Anode-Supported Planar SOFC

Characteristic simulation with various anode support thicknesses of membrane electrode assembly in SOFC

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Numerical Analysis of Thermal Stress for a Stack of Planar Solid Oxide Fuel Cells

A Numerical Investigation of the Thermal Stresses of a Planar Solid Oxide Fuel Cell

Sensitivity analysis of thermal stress in a cathode porous electrode for a planar solid oxide fuel cell

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

Quantifying Microstructure Features for High-Performance Solid Oxide Cells

The physical properties and effects of sintering conditions on rSOFC fuel electrodes evaluated by molecular dynamics simulation