Abstract:Bismuth ferric oxide nanopowders were prepared through combustion method. Pure phase and well-crystallized BiFeO3 can be obtained by controlling the combustion process, fuel type and fuel-to-oxidant ratio. The evolutions of phase constitution and structural characteristics of the as-resulted nanopowders were investigated by X-ray diffraction, scanning electron microscope, and simultaneous thermogravimetric analysis. The results revealed that both the type and amount of fuel have to be carefully considered because they play an important role in total reaction characteristics. Among all tested fuels, L-alpha-alanine and glycine are the suitable fuels for BiFeO3 synthesis. For alpha-alanine, the optimal fuel-to-oxidant ratio is 0.22, which results in a suitable flame temperature for BiFeO3 formation. Still, too little fuel would result in only amorphous phase powders due to the low flame temperature and too much fuel would lead to transformation of the BiFeO3 phase to impurities because of the high flame temperature involved. The resulting BiFeO3 nanopowders exhibited strong H2O2-activiting ability and weak magnetism. When BiFeO3 nanopowders were used as a heterogeneous Fenton-like catalyst to degrade rhodamine B (RhB), the apparent rate constant for RhB degradation in the presence of H2O2 at pH 5.0 was evaluated to be 0.048 min(-1). (C) 2011 Elsevier B.V. All rights reserved.

Study on Synthesis of Nanocrystalline Co3O4 Powders by Solution Combustion Technique and the Subsequent Heat Treatment Process

Studies on the nanocrystalline Co3O4 by wet synthesis and its microstructure

HYDROTHERMAL SYNTHESIS AND MAGNETIC PROPERTIES OF CoFe2O4 NANO-POWDER

Solid-state Synthesis of Cobalt Oxide (co3 O4 ) Nanocrystallites and Crystallization Kinetics During Thermal Treatment

Synthesis of CoFe2O4 Nanoparticles via Solution Method and Their Magnetic Properties

Moderate temperature synthesis of nanocrystalline Co3O4 via gel hydrothermal oxidation

Synthesis and optical characterization of Co3O4 nanocrystals

Preparation of Cofe2o4 Nanocrystallite by Sol-Gel Combustion Synthesis and Evaluation of Its Reaction Performance

Synthesis of ultrofine LiCoO2 by citrate-nitrate gel combustion process

Nanocasting Synthesis of Mesostructured Co3o4 Via A Supercritical Co2 Deposition Method and the Catalytic Performance for Co Oxidation

Synthesis of Nanocrystalline NiO/doped CeO2 Compound Powders Through Combustion of Citrate/nitrate Gel

Combustion synthesis and characterization of nanocrystalline CeO2-based powders via ethylene glycol–nitrate process

Mechanochemical Synthesis of Cobalt Oxide Nanoparticles

Mechanism of Auto Combustion Method in Synthesis of Nanocrystalline NiFe<SUB>2</SUB>O<SUB>4</SUB> Powders: Mechanism of Auto Combustion Method in Synthesis of Nanocrystalline NiFe<SUB>2</SUB>O<SUB>4</SUB> Powders

Nanophased CoFe2O4 Prepared by Combustion Method

Powder Synthesis and Characterization of Nanocrystalline CeO2 Via the Combustion Processes

The controllable preparation of Co 3 O 4 nanostructure for designing optimal mechanical and magnetic properties of graphite/kaolin based compounds

Shape-controlled Synthesis of Nanocubic Co3O4 by Hydrothermal Oxidation Method

Synthesis and Characterization of Ca3Co4O9 Nanoparticles by Citrate Sol-Gel Method

Controllable Synthesis and Characterization of Cube-Shaped Co3O4 Nanomaterials

Factors Controlling Pure-Phase Magnetic BiFeO3 Powders Synthesized by Solution Combustion Synthesis