Abstract:Physiological closed-loop controlled (PCLC) medical devices are complex systems integrating one or more medical devices with a patient’s physiology through closed-loop control algorithms; introducing many failure modes and parameters that impact performance. These control algorithms should be tested through safety and efficacy trials to compare their performance to the standard of care and determine whether there is sufficient evidence of safety for their use in real care setting. With this aim, credible mathematical models have been constructed and used throughout the development and evaluation phases of a PCLC medical device to support the engineering design and improve safety aspects. Uncertainties about the fidelity of these models and ambiguities about the choice of measures for modeling performance need to be addressed before a reliable PCLC evaluation can be achieved. This research develops tools for evaluating the accuracy of physiological models and establishes fundamental measures for predictive capability assessment across different physiological models. As a case study, we built a refined physiological model of blood volume (BV) response by expanding an original model we developed in our prior work. Using experimental data collected from 16 sheep undergoing hemorrhage and fluid resuscitation, first, we compared the calibration performance of the two candidate physiological models, i.e., original and refined, using root-mean-squared error (RMSE), Akiake information criterion (AIC), and a new multi-dimensional approach utilizing normalized features extracted from the fitting error. Compared to the original model, the refined model demonstrated a significant improvement in calibration performance in terms of RMSE (9%, P = 0.03) and multi-dimensional measure (48%, P = 0.02), while a comparable AIC between the two models verified that the enhanced calibration performance in the refined model is not due to data over-fitting. Second, we compared the physiological predictive capability of the two models under three different scenarios: prediction of subject-specific steady-state BV response, subject-specific transient BV response to hemorrhage perturbation, and leave-one-out inter-subject BV response. Results indicated enhanced accuracy and predictive capability for the refined physiological model with significantly larger proportion of measurements that were within the prediction envelope in the transient and leave-one-out prediction scenarios ( P < 0.02). All together, this study helps to identify and merge new methods for credibility assessment and physiological model selection, leading to a more efficient process for PCLC medical device evaluation.

The Research of Mathematical Models in BlPM/ClPM Key ComParison CCM. FF-K4. 2. 2011 Volume ComParison at 100 μL

Comparing research on two different numerical models of electrostatically actuated valveless micropump

Mathematical model and experimental verification of high flow cartridge servo valve

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Study on Friction Characteristics of Slipper Pair of Large Displacement High-Pressure Piston Pump

Study on Calibration Method for the Performance Index of SPR Sensors

Precision Motion Control of an Independent Metering System with an Adaptive Piecewise Polynomial Valve Model

Summarization and Comparison of the Four Volumetric Analyses in Analytical Chemistry

Comparison of Monte Carlo Simulation, Least Square Fitting and Calibration Factor Methods for the Evaluation of Measurement Uncertainty Using Direct Pressure Indicating Devices

Comparisonstudies on flow measurement methods for cylinder water hole in diesel engine

Measuring Method of Concrete Pump Discharge Based on Pumping Pressure

Evaluation of “method uncertainty” in the calibration of piston pipettes (micropipettes) using the gravimetric method in accordance with the procedure of ISO 8655-6

Comparison results between PTB and CIMM on the force transducer calibration under sinusoidal loading

Mathematical modeling applied to the uncertainty analysis of a tank prover calibration: Understanding the influence of calibration conditions on the GUM validation using the Monte Carlo method

The comparison of flow rate calibration methods for high-performance liquid chromatography (HPLC) pump

Pipette Aspiration of Hyperelastic Compliant Materials: Theoretical Analysis, Simulations and Experiments

Comparative analysis of calculating sigma metrics by a trueness verification proficiency testing-based approach and an internal quality control data inter-laboratory comparison-based approach.

Supplementary comparison of national measurement standards of gauge pressure in the range from 1 MPa to 10 MPa

Accuracy assessment methods for physiological model selection toward evaluation of closed-loop controlled medical devices

Uncertainty Analysis of Flow Measurement of the VOCs Sampler

EURAMET Key Comparison EURAMET.M.D-K4.2020: Hydrometer Calibration Comparison from 600 Kg/m3 to 2000 Kg/m3