Abstract:A good efficiency performance of a pump over a wide range of displacement conditions is crucially important for variable pump control systems to save energy. However, according to the literature, less attention has been paid to the understanding of the efficiency, leakage flow, and compression flow characteristics of the pump with respect to displacement conditions. In this study, a test bench was built, and a novel explicit volumetric loss model was proposed to investigate these problems. The overall efficiency is found to drop considerably with the decreasing displacement. The volumetric losses range from 13% to 47% of the total power losses of pump at the rated speed, under the conditions of pressure ranging from 5 to 35 MPa and displacement ranging from 13% to 100% of full displacement. The highest proportion of compression flow losses in the total volumetric losses of pump at the rated speed can reach up to 41% when the pressure and displacement are greater than 30 MPa and 88% of full displacement, respectively; after that, the proportion gradually decreases with decreasing displacement. However, the leakage flow generally increases with decreasing displacement, or may decrease first and begin to increase after the minimum with the further decrease of displacement. In the components of leakage of slipper/swash plate pair, the squeeze leakage is found to reach a magnitude equal to that of the Poiseuille leakage. The findings can guide the further research and design of pumps with better efficiency performance.

Measuring Method of Concrete Pump Discharge Based on Pumping Pressure

Measuring Method of Concrete Pump Discharge Based on Pressure

Theoretical Research on Measuring Method of Concrete Pump Discharge

Research on Measuring Method of Concrete Pump Discharge Based on Ultrasonic Doppler Method

Research Of Measuring Method On The On-Line Output-Of Concrete Pump

The System and Method of Concrete-pump Measures

Comprehensive Performance Measurement for Closed-circuit Variable Displacement Pump

Study on Modeling and Simulation of Concrete Pump Hydraulic System

Research on Filtering Method of Concrete Pump Pressure Based on Median Filter

HOW TO SAFELY AND EFFICIENTLY APPLY CONCRETE PUMPING AGENT

Pressure and Flow Characteristic Modeling of Water Hydraulic Axial Piston Pump Based on Variable Fluid Properties

Study on Mix Proportion Design Method of Concrete Based on the Theory of High Packing

Dynamic Measurement and Study of the Bore Pressure on a Vertical Square Cylinder in Qian-tang River

Characteristics of Volumetric Losses and Efficiency of Axial Piston Pump with Respect to Displacement Conditions

Low Leakage and High Volumetric Efficiency Research of Seawater Plunger Pump

Probabilistic Modeling and Prediction of Dynamic Discharge Process in Multiphase Pumps

Study on Wavelet Filtering Method of Pressure in Concrete Pump Transport Pipe

Numerical Study on Concrete Pumping Behavior via Local Flow Simulation with Discrete Element Method

Study On Modeling And Simulation Of Concrete Pump Oscillating System

The Direct Measurement of the Cylinder Block Dynamic Characteristics Based on a Non-Contact Method in an Axial Piston Pump

Study on Modeling and Simulation of Concrete Pump Agitating System Based on AMESim