Abstract:In the process of fracturing, the position of the fractures can be identified by analyzing the spectrum of the water hammer pressure wave signals after pump shut-in. However, the collected water hammer pressure data contain a lot of noises, which brings difficulty to the spectrum analysis and affect the accuracy of the final results. Removing multiple kinds of noises while protecting useful fracture response is the challenge. However, the filtering model for the water hammer pressure wave signals is absent. This paper proposes a new comprehensive filtering model for pump shut-in water hammer pressure wave signals. The filtering model contains three parts. First, we designed a two-step filtering method, including Hampel filter and FIR low-pass filter, to filter signals in the main channel. Second, multi-frequency-adaptive notch and median filter were combined to construct the signals in the reference channel, which can be used to protect the useful frequency of the water hammer wave signals and pressure response of the fractures from being eliminated. Third, the filtered signal is obtained by adaptive cancellation between the signals in the main channel and the reference channel. After that, the filtering effects of signals with and without fractures were studied by constructing simulated signals and collecting the signals in the laboratory experiment. The signal-to-noise ratio (SNR) gain and the mean square error (MSE) reduction were selected as indicators for the model validation, and the cepstrum was also used as the indicator to verify the preservation of fracture response characteristics. Besides, the noise adaptive range of the model was evaluated by increasing the noise intensity to the constructing signal. This research can provide a new and useful filtering method for water hammer pressure wave signals in the field.

Study on Wavelet Filtering Method of Pressure in Concrete Pump Transport Pipe

Research on Filtering Method of Concrete Pump Pressure Based on Median Filter

Test Study on Distribution of Base Pressure of Rigid Pipe on Flat Soil Foundation

Study on Modeling and Simulation of Concrete Pump Hydraulic System

Theoretical Research on Measuring Method of Concrete Pump Discharge

Noise Removal for the Steady-State Pressure Measurements Based on Domain Knowledge of Water Distribution Systems

Analysis of Pressure Fluctuation Signal of Gas-Solid Fluidized Bed Based on Wavelets Transform

Measuring Method of Concrete Pump Discharge Based on Pressure

Research Of Measuring Method On The On-Line Output-Of Concrete Pump

Detection of Water Pipe Leak Location Using Wavelet Packet Decomposition and Power Feature Extraction

Experimental Investigation on the Wave-Induced Pore Pressure Around Shallowly Embedded Pipelines

Research on Measuring Method of Concrete Pump Discharge Based on Ultrasonic Doppler Method

Investigation On Pipeline Leak Point'S Detecting Based On Wavelet Algorithm

Wavelet Analysis of Pressure Fluctuation Signals in a Gas-Solid Fluidized Bed

Research on a Method for Compressing Data Based on Wavelet Networks

Study on wave velocity characteristics and compressive strength of concrete under different water pressure

Measuring Method of Concrete Pump Discharge Based on Pumping Pressure

Water Transport in Unsaturated Cracked Concrete under Pressure

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Adaptive Filtering For Leak Signal Of Pipelining

A new comprehensive filtering model for pump shut-in water hammer pressure wave signals during hydraulic fracturing