Abstract:The analyses illustrated in this manuscript have been performed in order to provide the required data for the amplitude-and-phase calibration of the D-dot voltage probes used in the ITER-like antenna at the Joint European Torus tokamak. Their equivalent electrical circuit has been extracted and analyzed, and it has been compared to the one of voltage probes installed in simple transmission lines. A radio-frequency calibration technique has been formulated and exact mathematical relations have been derived. This technique mixes in an elegant fashion data extracted from measurements and numerical calculations to retrieve the calibration factors. The latter have been compared to previous calibration data with excellent agreement proving the robustness of the proposed radio-frequency calibration technique. In particular, it has been stressed that it is crucial to take into account environmental parasitic effects. A low-frequency calibration technique has been in addition formulated and analyzed in depth. The equivalence between the radio-frequency and low-frequency techniques has been rigorously demonstrated. The radio-frequency calibration technique is preferable in the case of the ITER-like antenna due to uncertainties on the characteristics of the cables connected at the inputs of the voltage probes. A method to extract the effect of a mismatched data acquisition system has been derived for both calibration techniques. Finally it has been outlined that in the case of the ITER-like antenna voltage probes can be in addition used to monitor the currents at the inputs of the antenna.

Calibration Theory and Measurement Method of the Frequency Characteristics of the Four-Pair-Terminal Standard Capacitor

Validation of Frequency Characteristic of Capacitance Standard in the Extending Frequency Range

Equivalent Circuit Model Of Four-Terminal-Pair Capacitor Based On High-Frequency Traceable Measurement

The Capacitance Metrology of Four Terminal-Pair Solid-Dielectric Capacitor in the Extended Frequency Range

High-frequency Characteristic of Four-Terminal-pair Standard Resistance

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

A Novel Four-Port Calibration Method for High Frequency On-Wafer S-parameter Measurement

Calibration Method for Electrical Capacitance Tomography Syem and It's Parameters Readjust

Experimental Characterisation and Modelling of On-Chip Capacitors and Resistors on GaAs Substrates

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

Calibration of Hydrophones Using a Frequency Domain Filter Processing Method: Theory and Experiment

Precise Measurement of Capacitor Based on Digital Phase Detecting System

Sensitivity and Uncertainty Analysis of Nonideal Calibration Standards for 16-Term Error Model

Calibration of the Capacitive Sensor Used in the Very Fast Transient Overvoltage Measurement of Ultra High Voltage Gas Insulated Switchgear

Method for Accurately Measuring the Power-Frequency Parameters of Ehv/Uhv Transmission Lines

A Calibration Approach for Terahertz Wave Measurements at Frequencies from 0.11 THz to 0.17 THz

A Perfect Calibration Method of Two Points Based on Waveform Average and the Optimal Measuring Region

Calibration Method of a Wideband AC Resistance Voltage Divider Based on an Equivalent Model

HW-DFT-Based Measurement Method of Frequency-Coupling Characteristics Considering Fundamental Frequency Deviation for Stability Analysis

ITER-like antenna capacitors voltage probes: Circuit/electromagnetic calculations and calibrations

Asymmetric Calibration and Characterization for Diff-port Magnetic Field Probing System