Abstract:Spark plasma sintering (SPS), a sintering method that uses the action of pulsed direct current and pressure, has received a lot of attention due to its capability of exerting control over the microstructure of the sintered material and flexibility in terms of the heating rate and heating mode. Historically, SPS was developed in search of ways to preserve a fine-grained structure of the sintered material while eliminating porosity and reaching a high relative density. These goals have, therefore, been pursued in the majority of studies on the behavior of materials during SPS. Recently, the potential of SPS for the fabrication of porous materials has been recognized. This article is the first review to focus on the achievements in this area. The major approaches to the formation of porous materials by SPS are described: partial densification of powders (under low pressures, in pressureless sintering processes or at low temperatures), sintering of hollow particles/spheres, sintering of porous particles, and sintering with removable space holders or pore formers. In the case of conductive materials processed by SPS using the first approach, the formation of inter-particle contacts may be associated with local melting and non-conventional mechanisms of mass transfer. Studies of the morphology and microstructure of the inter-particle contacts as well as modeling of the processes occurring at the inter-particle contacts help gain insights into the physics of the initial stage of SPS. For pre-consolidated specimens, an SPS device can be used as a furnace to heat the materials at a high rate, which can also be beneficial for controlling the formation of porous structures. In sintering with space holders, SPS processing allows controlling the structure of the pore walls. In this article, using the literature data and our own research results, we have discussed the formation and structure of porous metals, intermetallics, ceramics, and carbon materials obtained by SPS.

Developmental states of porous metal materials prepared by spark plasma sintering

Fabrication of Porous Materials by Spark Plasma Sintering: A Review

Research Progresses of Preparation of Permanent Magnetic Materials by Spark Plasma Sintering

Progress in the applications and preparations of porous metals

Research Progress Of Preparation Of Amorphous Alloys Via Spark Plasma Sintering

An analytical review on Spark Plasma Sintering of metals and alloys: from processing window, phase transformation, and property perspective

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Microstructure and properties of porous Si 3 N 4 ceramics fabricated by digital light processing combined with spark plasma sintering

Use of Spark Plasma Sintering for Fabrication of Porous Titanium Aluminide Alloys from Elemental Powders

Techniques for the preparation of porous metals

Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials

Recent Developments of High-Pressure Spark Plasma Sintering: An Overview of Current Applications, Challenges and Future Directions

Preparation and interfacial bonding of oversize ZrO2 reinforced metal matrix composites prepared by spark plasma sintering

Recent progress in particulate reinforced aluminum composites fabricated via spark plasma sintering: Microstructure and properties

Development of Some New Porous Metal Materials

Porous Metals: Research Advances and Applications

Spark Plasma Sintering of Complex Metal and Ceramic Structures Produced by Material Extrusion

The Microstructure Evolution, Mechanical Properties and Densification Mechanism of Tial-Based Alloys Prepared by Spark Plasma Sintering

Tooling in Spark Plasma Sintering Technology: Design, Optimization, Application

Current progress of key technology of porous bone tissue scaffold manufacturing using selective laser sintering rapid prototyping (SLS)

Preparation and characterization of permeability and mechanical properties of three-dimensional porous stainless steel