Abstract:A prediction model of the welding process of Ti-6Al-4V titanium alloy was established by using the finite element method, which was used to evaluate the phase composition, residual stress and deformation of the welded joints of Ti-6Al-4V sheets with different processes (including tungsten inert gas welding, TIG, and laser beam welding, LBW). The Ti-6Al-4V structures of TIG welding and LBW are widely used in marine engineering. In order to quantitatively study the effects of different welding processes (including TIG welding and LBW) on the microstructure evolution, macro residual stress and deformation of Ti6Al4V titanium alloy sheets during welding, a unified prediction model considering solid-state phase transformation was established based on the ABAQUS subroutine. In this paper, LBW and TIG welding experiments of 1.6 mm thick Ti-6Al-4V titanium alloy sheets were designed. The microstructure distribution of the welded joints observed in the experiment was consistent with the phase composition predicted by the model, and the hardness measurement experiment could also verify the phase composition and proportion. From the residual stress measured by experiment and the residual stress and deformation calculated by finite element simulation of LBW and TIG weldments, it is concluded that the effect of phase transformation on residual stress is mainly in the weld area, which has an effect on the distribution of tensile and compressive stress in the weld area. The overall deformation of the welded joint is mainly related to the welding process, and the phase transformation only affects the local volume change of the weld seam. Importantly, the phase composition and residual stress, which are scalar fields, calculated by the established model can be introduced into the numerical analysis of structural fracture failure as input influence factors.

Numerical Simulation of the Residual Stress in Laser Beam Welded and TIG Welded Joints of Thin Plate of Titanium Alloy

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Finite Element Analysis of Laser Welding Residual Stress and Distortion in Welded Joints of TC4 Titanium Alloy

Numerical and Experimental Analysis of Residual Stresses in Full-Penetration Laser Beam Welding of Ti6Al4V Alloy

Numerical Investigation of Residual Stress in Thick Titanium Alloy Plate Joined with Electron Beam Welding

Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

Residual Stress Measurements with the Hole-drilling Technique in the Joints by the Laser and TIG Welding for a Thin Plate of Titanium Alloy

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

Residual Welding Stresses in Laser Beam and Tungsten Inert Gas Weldments of Titanium Alloy

Numerical Research on the Weld Bead Geometry and Residual Stresses with Different Heat Source Models in Laser Welding of Tc4 Titanium Alloy

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

High Gradient Residual Stresses During Laser Deep Penetration Welding of Titanium Alloy

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

Residual Stress Measurement in Electron Beam Welded Joints of 50mm Thick Titanium Alloy

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Numerical Simulation and Welding Stress and Distortion Control of Titanium Alloy Thin Plate

3D-FEM numerical simulation of welding stress in thin aluminum alloy plate

Effects of Welding Parameters on Weld Shape and Residual Stresses in Electron Beam Welded Ti2AlNb Alloy Joints

Evaluation on Residual Stresses in Thick Titanium Welded Alloys