Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

Algorithm of the Tool Length Compensation of Orthogonal the Milling Rotary Surface

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Noninterference tool orientations and maximum taper angles of conical cutters in 4-axis milling of complex channel parts

Research of Algorithm of Cutting Tool Radius Compensation in Five-axis CNC and Simulation of Numerical Control

Analysis and Control Algorithm of Non-linear Error for Nine-axis Synchronize Milling Blades with Twin-cutters

Process Simulation and Process Parameter Optimization of Large Automobile Cover Die Hard Milling

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

Research on 3D Cutter Radius Compensation for 5-Axis Flank Milling

The Research on the Over-Cut Compensation Algorithm of CNC Profiling Processing

Nearly Arc-Length Tool Path Generation and Tool Radius Compensation Algorithm Research in FTS Turning

Real-time Compensation Strategy for Clamping Force-Induced Error in Face Milling of Mass-Produced Valve Bodies

Study on Cutter Radius Compensation Methods for 5-Axis Cnc Machining

High Efficiency Orientated Milling Parameter Optimization with Tool Wear Monitoring in Roughing Operation

An Improved Fix-Length Compensation Method for Electrical Discharge Milling Using Tubular Tools

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

Algorithm of Efficiency Improvement and Application in Milling Simulation Based on Solid Modeling

Error Compensation for Machining of Large Thin-Walled Part with Sculptured Surface Based on On-Machine Measurement