Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

Real-time Compensation Strategy for Clamping Force-Induced Error in Face Milling of Mass-Produced Valve Bodies

Analysis and compensation of surface flatness of thin-walled valve body parts

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

An Error Compensation Method for Multi-Axis Machining Based on the Actual Contour Measurement

5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

A Closed-Loop Error Compensation Method for Robotic Flank Milling

A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

On-machine Measurement-Based Compensation for Machining of Thin Web Parts

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

Compensation of Deformation Errors in Five-Axis Flank Milling of Thin-Walled Parts Via Tool Path Optimization

Error Compensation for Machining of Large Thin-Walled Part with Sculptured Surface Based on On-Machine Measurement

Integrated Geometric and Thermal Error Modeling and Compensation for Vertical Machining Centers

Peripheral Milling Force Induced Error Compensation Using Analytical Force Model and APDL Deformation Calculation

Dynamics Modeling-Based Optimization of Process Parameters in Face Milling of Workpieces with Discontinuous Surfaces

An Effective and Automatic Approach for Parameters Optimization of Complex End Milling Process Based on Virtual Machining

Optimal Deformation Error Compensation Process in Flank Milling of Thin-Walled Workpieces