Analysis and compensation of surface flatness of thin-walled valve body parts
Yukun Xiao,Guangyan Ge,Xiaobing Feng,Jianguo Yang,Zhengchun Du
DOI: https://doi.org/10.1007/s00170-022-10301-4
IF: 3.563
2022-10-17
The International Journal of Advanced Manufacturing Technology
Abstract:Thin-walled parts, such as the automobile gearbox valve body, are easily deformed during manufacturing due to low rigidity, often resulting in significant errors in the produced geometry. Off-line inspection, commonly applied in industry to ensure the flatness of the valve body, is susceptible to re-alignment errors, while finite element-based deformation prediction is too time-consuming, due to the complex geometrical model of the valve body, to keep up with the pace of manufacturing. In this paper, a real-time compensation method based on on-machine measurement (OMM) is proposed to reduce surface flatness and improve efficiency in the face milling of thin-walled valve body parts with a large-diameter cutter. First, an OMM-based inspection of the valve body is performed to investigate various contributors to flatness caused by part deformation during machining, which found the clamping force to be dominant. Subsequently, an offset-based error compensation strategy is developed considering the influence of the large diameter of the cutter on the machined surface profile. This error compensation strategy is then implemented, using OMM inspection results, through the external machine zero point shift (EMZPS) method, which corrects the tool path automatically without the need to modify the G-code. Three sets of repeated compensation experiments show a reduction in the valve body’s surface flatness by 57.2%, 71.0%, and 43.6% after compensation, thus validating the effectiveness of the proposed method.
engineering, manufacturing,automation & control systems