Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

Research on 3D Cutter Radius Compensation for 5-Axis Flank Milling

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

An accurate surface error optimization for five-axis machining of freeform surfaces

Inverse Kinematics with 3-Dimensational Tool Compensation for 5-Axis Machine Center of Tilting Rotary Table

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Geometric error compensation of five-axis ball-end milling based on tool orientation optimization and tool path smoothing

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

Accuracy enhancement of five-axis CNC machines through real-time error compensation

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

Regionalized compensation method for nonlinear error control

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling

Envelope Surface Modeling and Tool Path Optimization for Five-Axis Flank Milling Considering Cutter Runout

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects