Abstract:2219 aluminum–copper alloy is a major material in launch vehicles transition rings. The study of dynamic recrystallization during its rolling and forming process is beneficial to improving the performance enhancement of 2219 aluminum alloy ring parts. In this paper, a multi-scale simulation of grain refinement and distribution of dynamic recrystallization (DRX) grains during the rolling of 2219 aluminum alloy rings is carried out using the finite element method and cellular automata method. On the basis of the JMK DRX model, an ABAQUS subroutine was written to simulate the ring-rolling of 2219 aluminum alloy, and the distribution of DRX percentage and average grain size was analysed from a macroscopic point of view, with a maximum DRX level of 12% and an average grain size distribution from 247 μm to 235 μm from the inside of the aluminum alloy ring towards the surface. A cellular automaton model of DRX during rolling of large aluminum alloys was developed to effectively simulate DRX nucleation, growth, and grain compression deformation during rolling. The DRX nucleation occurs at the grain boundaries and then grows, resulting in a homogeneous organisation and a refinement of grain size, with both the original and DRX grains being compressively deformed as the rolling process progresses and the grains being gradually elongated tangentially. Finally, a comparison of the experimental results with the simulations to obtain grain size and morphology demonstrates consistent results, indicating that the combination of FE and CA methods is an effective approach for a more comprehensive understanding of the microstructural evolution during rolling.

Simulation of Dendrite Morphology Evolution in Arc Deposition and Micro Rolling Process

Modeling Microstructure Evolution in Shape Memory Alloy Rods Via Legendre Wavelets Collocation Method

Simulation of Microstructure Evolution During Hybrid Deposition and Micro-Rolling Process

Microstructure Evolution of Ti-6Al-4V with Periodic Thermal Parameters During Axial Closed Die Rolling Process

Microstructure Evolution of Inconel 718 Alloy During Ring Rolling Process

Influence of Cold Rolling Reduction on the Deformation Behaviour and Crystallographic Orientation Development

Multi-scale Simulation of Dendrite Growth for Direct Energy Deposition of Nickel-Based Superalloys

Simulation for microstructure evolution of Al-Si alloys in solidification process

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

Multi-scale Simulation of Recrystallization during Rolling of Large 2219 Aluminum Alloy Rings

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Crystal Plasticity Finite Element Simulation of Grain Evolution Behavior in Aluminum Alloy Rolling

Numerical Simulation of Dendrite Growth of Aluminum Alloy

A Multi-scale Modelling by Coupling Cellular Automata with Finite Element Method and Its Application on Cross-Wedge Rolling

Numerical Simulation of Microstructure Evolution of Large GCr15 Bar During Multi-Pass Rough Rolling

Simulation of Dendritic Deformation Induced by Convection in Alloy Solidification

Multiple Process Microstructure Evolution Simulation of Ultrasonic Assisted Rolling Directed Energy Deposition

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Simulation of Dendrite Remelting via the Phase-Field Method

Development of Simulation Software for Predicting Microstructure and Properties of High Carbon Steel During Wire Rolling

Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting During Low Pressure Die Casting