Abstract:Due to the low content of silicon and aluminum in red mud and the low reaction activity of red mud, when it was used to prepare composite cementitious materials, it was necessary to assist other aluminosilicates and improve their activity by certain methods. In this study, it was proposed to add slag to increase the percentage of silicon and aluminum in the system, and to improve the reactivity of the system through the activation effect of sulfate in phosphogypsum. The effects of slag and phosphogypsum contents on the mechanical properties and microstructures of composite cementitious materials were studied. X-ray diffraction analysis (XRD), thermogravimetric analysis (TG-DTG), and scanning electron microscopy (SEM) were used to analyze the effects of slag and phosphogypsum contents on the hydration products, microstructure, and strength formation mechanism of composite cementitious materials. The results show that with the increase of slag, the strength of the composite cementitious material increases gradually. When the slag content is 50%, the 28-day compressive strength reaches a maximum of about 14 MPa. Compared with the composite material without phosphogypsum, the composite cementitious material with 10–20% phosphogypsum showed higher strength properties, in which the 28-day compressive strength exceeds 24 MPa. The main reason for this is that the sulfate in phosphogypsum can cause the composite cementitious material to generate a large amount of ettringite and accelerate the dissolution of red mud and slag, increasing the release of aluminates, silicates, and Ca2+ to form more C-(A)-S-H and ettringite. In addition, a large amount of C-(A)-S-H makes ettringite and unreacted particles combine into a uniform and compact structure, thus improving the strength. When the content of phosphogypsum exceeds 40%, the 28-day compressive strength of the composite cementitious material drops below 12 MPa due to the presence of fewer hydration products and the expansion of ettringite.

Hydraulic Cementitious Properties of Bayer Process Red Mud from Guangxi Pingguo Aluminium Corporation

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Evaluation of blends bauxite-calcination-method red mud with other industrial wastes as a cementitious material: properties and hydration characteristics.

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Structural investigation relating to the cementitious activity of bauxite residue — Red mud

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

Solidification Mechanism of Bayer Red Mud under the Action of Calcium Hydroxide

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Evaluation of red mud based binder for the immobilization of copper, lead and zinc

Microstructure and Key Properties of Phosphogypsum-Red Mud-Slag Composite Cementitious Materials

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

Preparation of building materials from Bayer red mud with magnesium cement

Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes

Preparation and property studies of ferric sulfoaluminate cement based on Bayer red mud and phosphogypsum

C-A-S-H Gel and Pore Structure Characteristics of Alkali-Activated Red Mud–Iron Tailings Cementitious Mortar

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Treatment of Bayer-Process Red Mud through Microbially Induced Carbonate Precipitation

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Synergistic Activation Mechanism and Long-Term Properties of a Solid Waste Cementitious Materials Based on Red Mud and Calcium Carbide Slag

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill