Abstract:The potential of adopting asymmetrical temperature control (ATC) schemes to tightly control dividing-wall distillation columns (DWDCs) has yet to be fully explored due to the following two problems. First, the inference accuracy toward the controlled product purity of the candidate controlled variables (CCVs) synthesized for each control loop was not high enough. Second, the determination of the most appropriate CCV for each control loop lacked a sufficient theory basis. To alleviate these two problems, two measures are specially adopted in the current work, thereby forming a systematic method for deriving the ATC schemes. First, the creations of a double temperature difference (DTD) and temperature difference (TD) are reformed with the aid of a recently defined performance metric, the averaged absolute variation magnitudes (AAVMs). Namely, DTD is generated according to a novel method based on the AAVMs, rather than the conventional method based on the sensitivity analysis and SVD analysis, and TD is modified in form through multiplying the temperature of the reference stage by a coefficient that equals the ratio of the AAVMs of the sensitive stage and the reference stage. Then, a sequential search procedure is proposed to help determine the most appropriate CCV for each control loop from all of the synthesized CCVs with a combined consideration of the inference accuracy to the controlled product purity and the interaction between control loops. In terms of the operation of a benzene–toluene–o-xylene DWDC, the proposed method is assessed by means of a thorough comparison between the derived ATC scheme and the double temperature difference control scheme. In comparison with the latter, the former displays not only relatively better transient responses but also smaller steady-state deviations in the three controlled product qualities. These findings demonstrate the effectiveness and feasibility of the method proposed for deriving ATC schemes.

Composition control start-up of divided wall column pilot plant used for aromatic reformate separation

Startup of divided wall column for high purity separation of aromatic reformate

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Intelligence Aided Advanced Process Control of Industrial Distillation Column

A startup model for simulation of batch distillation starting from a cold state

Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System

Remixing Control For Divided-Wall Columns

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Modelling and Control Analysis of Dividing Wall Distillation Columns

Design, optimization, and control of reactive distillation column for the synthesis of tert-amyl ethyl ether

Compartmental modeling and solving of large-scale distillation columns under variable operating conditions

Control of a Pressure-Swing Distillation Process for Benzene/isopropanol/water Separation with and Without Heat Integration

Numerical and Experimental Research on a Kaibel Divided-Wall Column: Design and Steady-State and Dynamic Operation

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Study On Simulation Of Nitrobenzene Distillation Using Dividing Wall Column

Large-scale Equation Oriented Dynamic Simulation of Ethylene Separation Columns

Effective Derivation of Asymmetrical Temperature Control Schemes for Dividing-Wall Distillation Columns

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Dynamic control of an energy-saving process with two extractive dividing-wall columns for separation of acetone/methanol/butanone/ tert-butyl alcohol mixtures