Abstract:Sargent dividing-wall distillation columns (DWDCs) can significantly reduce the energy consumption required for separating quaternary mixtures. However, their effective design and strict product purity control can be challenging to achieve, which severely limits their development and application in the industry. To address this problem, a systematic study on their design and control was conducted in this article based on the case of separating a quaternary mixture of methanol, ethanol, 1-propanol, and n-butanol. Firstly, a multi-objective optimization framework was proposed, in which the total annual cost (TAC), CO 2 emission, and condition number (CN) were taken as objective functions, and NSGA-III and TOPSIS algorithms were employed to search for the optimal design of the Sargent DWDC. To avoid the convergence difficulty issue of the rigorous model of the Sargent DWDC, a Random Forest surrogate model was used in the optimization process to predict its steady-state and dynamic performance accurately and rapidly. Secondly, a novel composition control structure, consisting of seven control loops, was proposed to achieve strict product purity control of the Sargent DWDC. Three composition difference control loops, located at the prefractionator and the middle column, are responsible for maintaining their composition profile shapes and thus mitigating the impact of feed disturbances on the main column. Additionally, four composition control loops, located at the main column, are responsible for strictly controlling the purities of the distillate, upper sidestream, lower sidestream, and bottom products. Dynamic simulation results showed that the Sargent DWDC can be operated stably under the proposed composition control structure for various feed composition and feed flow rate disturbances. These results not only confirmed the capability of the proposed composition control structure to strictly maintain product purities in the Sargent DWDC but also validated the effectiveness of the proposed multi-objective framework in achieving an energy-efficient and controllable Sargent DWDC.

Numerical and Experimental Research on a Kaibel Divided-Wall Column: Design and Steady-State and Dynamic Operation

Nonlinear Multivariable Control of a Dividing Wall Column Using a Different-Factor Full-Form Model-Free Adaptive Controller

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Dynamic optimization of operation of heat-integrated distillation column systems

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Dynamic Matrix Control of a Bubble-Column Reactor for Microbial Synthesis Gas Fermentation

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Dynamics and Control of High Purity Heat Integrated Distillation Columns

Thermodynamic Analysis, Simulation and Optimization on Energy Savings of Ideal Internal Thermally Coupled Distillation Columns

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Comparison of Temperature Control and Temperature Difference Control for a Kaibel Dividing Wall Column

Design and Control of Extractive Dividing Wall Column for Separating Dipropyl Ether/1-Propyl Alcohol Mixture

Steady-State Behavior of Four-Product Divided-Wall Columns for Alcohols Separation

Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System

Energy, exergy, economic, and environmental analysis of a novel liquid-only transfer dividing wall column with vapor recompression

Dynamic control of an energy-saving process with two extractive dividing-wall columns for separation of acetone/methanol/butanone/ tert-butyl alcohol mixtures

Nonlinear model predictive control for dividing wall columns

Multi-objective optimization and composition control of Sargent dividing-wall distillation columns