Abstract:The roll deformation model of the six-high rolling mill is one of the core models of the strip shape control theory. The influence function method (IFM) is a numerical method applied to solve the roll deformation problem. This study aims to address the problems of slow calculation speed and insufficient calculation accuracy of IFM in calculating the roll deformation of the six-high rolling mill. Three optimization measures are proposed, namely, optimizing the iterative calculation order of the roll deformation to improve the calculation efficiency; introducing the Adam (Adaptive Moment Estimation) gradient descent optimization algorithm to enhance the stability of the iterative process; and introducing a high-precision rolling force model based on the XGBoost (eXtreme Gradient Boosting) algorithm to improve the calculation accuracy of flatness in the IFM. Parallel experimental results show that by applying the three optimization measures simultaneously, improving the iterative calculation order of the roll deformation can improve the calculation speed by about 7.64 times; introducing the Adam algorithm can reduce the oscillation range of roll contact pressure by an average of 50.4%, increasing the stability of the calculation process; and introducing a high-precision rolling force model based on the XGBoost algorithm can improve the flatness calculation accuracy by about 39.1%. This study provides an effective method to improve the calculation speed and accuracy of the roll deformation in a six-high rolling mill, which has important academic application value.

A New Contour of the Backup Roll of 5 000 mm Wide Plate Mill

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

Analysis and Optimization of Cvc Backup Roll Contour of A 1800mm Continuous Hot Rolling Mill

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills

Design of intermediate roll contour and analysis of regulation ability on strip shape of 18-High mill

Contact Behaviors for Elastic Coupling System of Back -Up Roll Grouped Bearings and Intermediate Roll of Sendzimir Mill

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Finite Element Analysis of Temper Rolling Process

Research on roll contour and control strategy for edge drop control of high-strength steel in the cold rolling precision mill

Influence of Work Hardening on the Surface of Backup Rolls for a 4-High Rolling Mill Fractured during Rolling Campaign

Failure Analysis on Vertical Cracking of Medium Carbon Bainitic Steel Backup Roll

Optimization of Preventive Grinding of Backup Roll Against Contact Fatigue Cracking

Rebound control in multipass roll forming of cap-shaped parts based on segmental boundary optimization function

Research onForecast of Roll Wear of PC Mill

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Residual stress control of hot-rolled strips during run-out table cooling

Flexible Roll Forming with Staggered Arranged Rollers for the Large Curved Metal Plates Based on Numerical Simulation

Analysis of Edge Drop on Strip Due to Bending and Elastic Deformation of Back up Rolls in a Four-High Cold Mill

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Analysis of the Influence of Contact Stress on the Fatigue of AD180 High-Carbon Semi-Steel Roll

An improved method for calculating roll deformation of six-high rolling mill: enhances computation speed and accuracy