Abstract:A decade more from copper stave introduced form abroad to now, it has been widely used on bosh, belly as well as under shaft of blast furnace larger than 1000 m3 in China. Because of short time use, phenomena of naked or scaffolding on copper stave hot face happened occasionally which had serious influence on production. Enterprises urgently need to know what operational factors restricted the accretion~s remove on copper stave. Some steel compa- nies adjusted cooling water flow rate and temperature, which had little work frequently, to realize forming-accretion thickness and stability control. The heat transfer mathematic model of furnace wall shows as follows： the forming- accretion thickness change little which indicates that adjusting water speed and temperature in certain range has little effect on forming-accretion thickness~ the leading influencing factors are peripheral gas flow temperature and cooling stave heat flux;according to effect of peripheral gas flow on forming-accretion thickness of copper stave, peripheral gas flow temperature is divided into rapid change area, gradual change area, slowly change area and the subtle change area. Blast furnace production practice in Ansteel, Tangsteel as well as Wusteel confirmed the correctness of the results above. Researching results clear up some vague realization of affecting forming-accretion thickness, which has important instruction meaning to copper stave blast furnace production. Forming-accretion morning sys- tem developed on the basis of heat transfer mathematic model of furnace wall, which has tested by actual measure- ment, has been applied to a blast furnace in certain civil steel company, and heat load control standard of 35-58 kW/ m2 has been suggested for copper stave operation.

Heat Transfer Analysis for Staves with Cooling Water Pipes of Different Shape

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

Convective heat transfer boundary equivalent replacement and model simplification of cooling stave of blast furnace hearth

Thermo-Mechanical Coupling Finite Element Analysis of Blast Furnace Copper Staves

Temperature Field Analyses of Lining With Cooling Plates and Stave for Blast Furnace

Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

Cooling Stave Selection above Blast Furnace Tuyere

Numerical simulation of steel-copper-steel composite cooling staves: Heat transfer characteristics and structural optimization

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Recommendations on Reasonable Operation of BF Copper Stave

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Thermal Stress Analysis of Blast Furnace Hearth with Typical Erosion Based on Thermal Fluid-Solid Coupling

Theoretical Studies on the Water-colded Black Mark of Steel Slab in a Walking Beam Type Reheating Furnace

Application of Heat Transfer Theory in Analysis and Research for Heat Load of Blast Furnace Wall

3D thermodynamics and parameters analysis of the external combustion hot blast stove

Temperature distribution analysis and mechanical property prediction of wire loops in the Stelmor air-cooling system

Three-dimensional modelling of the wall heat transfer in the lower stack region of a blast furnace

Cooling Water Flow Rate Calculation for Hearth of Large Blast Furnaces