Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Theoretical Studies on the Water-colded Black Mark of Steel Slab in a Walking Beam Type Reheating Furnace

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Analysis of heat transfer coefficient and skid marks in a slab reheating furnace considering beam misalignment and contact heat conduction

Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Temperature Field Analyses of Lining With Cooling Plates and Stave for Blast Furnace

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Numerical investigation on heating process of Ti/Steel composite plate in a walking-beam reheating furnace

Optimization of Temperature Distribution in Thick Slab Continuous Casting for Direct Hot Rolling

Study on Online Real-Time Temperature Field Calculation Model for Slab Caster in the System of Dynamic Soft Reduction

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

Finite element analysis and experiment on induction heating process of slab continuous casting-direct rolling

FEM Analysis of Temperature and Stress Fields of Mould Wall in Continuous Casting of Steel Billet

FINITE ELEMENT ANALYSIS ON THE TEMPERATURE FIELD OF CONCRETE FILLED STEEL TUBULAR COLUMN-BEAM JOINTS IN FIRE

An Approach for Modelling Carbon Homogenization Processes of Steel in Micro-Scale

Multi-field coupling numerical simulation and experimental research of submerged arc surfacing process on the descaling rolls with different wall thickness

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Simulation and Control of Thermal Process in Bell-Type Annealing Furnace