Abstract:A numerical model of a cylindrical regenerative aluminum melting furnace was developed according to its operation characteristics.By including the standard k—e model,the species transport model and the P-1 radiation model to describe the turbulent combustion process in the furnace,and applying the equivalent specific heat method to describe the aluminum melting process,a transient and multi-fields coupled simulation was carried out to investigate the thermal alternation processes in the inlet and outlet areas of the furnace.The simulation results of the standard operation case show that,compared with the traditional operation with one burner,a more uniform temperature distribution can be achieved in the switch operation of two burners.In particular,the temperature rises quickly in the first three hours,followed by a slower rising due to heat absorbed by the melting alumina in the furnace.More simulations were carried out based on the orthogonal design to optimize the main five parameters that have significant influences on the process.The results indicate that an optimal operation condition can be achieved with the burner height of 657 mm,the vertical burner angle of 25°,the horizontal angle between two burners of 90°,the excess air coefficient of 1.1 and the air preheating temperature of 800 ℃.Compared with the result of the standard operation case,one hour can be reduced in the melting time of the alumina in the optimal condition,which is equivalent to 20% reduction in the energy consumption.

Numerical simulation research of the self-regenerative burner furnace heating characteristics

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace

Simulation of temperature field of sintering ignition furnace

Numerical Simulation on Optimum Design of Regenerative Burner

Numerical Simulation for Cold Blast Distribution Feature of Grid-type Burner of Hot Air Furnace

Three-dimensional numerical simulation of gaseous combustion process in fire furnace

Transient Multi-Field Coupled Simulation and Parameters Optimization of Cylindrical Regenerative Aluminum Melting Furnace

Numerical Simulation of Temperature and Velocity Field in All-Oxygen Combustion

Numerical Simulation Optimizing Research of Regenerative Burner Structure

Numerical Simulation and Experimental Study on A Novel Kiln Burner

A Three-Dimensional Numerical Model of Unsteady Flow and Heat Transfer in Ceramic Honeycomb Regenerator

Numerical simulation study of the unsteady flame characteristics of high temperature air combustion

Numerical Simulation of Slab Heating Process in A Regenerative Walking Beam Reheating Furnace

Numerical Simulation Of The Combustion Processes In A W-Shaped Boiler Furnace Under Different Operating Conditions

Numerical Simulation on Combustion Process of BFG Regenerative Burner

Numerical Simulation On Structure Optimization For Hot-Blast Stove Burner

Study on Operating Regulation of Hot Air Stove and Numerical Simulation of Heat Transfer in Regenerator Based on FLUENT

Numerical Simulation of a Walking Beam Reheating Industrial Furnace

NUMERICAL SIMULATION TO HEAT TRANSFER PROCESS AND THERMAL PERFORMANCE OF BALL PACKED-BED REGENERATOR USED IN METALLURGY FURNACE

Numerical Simulation of Gas Combustion and Heat Transfer in a Glass Melting Furnace

Optimum Design of Contiguous Regenerator Burner